Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Ice maker stops making ice entirely even though the freezer is at the correct temperature; the harvest cycle does not complete.
Ice maker runs but cubes are not ejected into the bin; sweep arm fails to complete a full revolution.
Water drips from the ice maker mold into the freezer or onto the floor due to a faulty fill valve or cracked mold housing.
Ice maker produces only one tray per day or significantly fewer cubes than the normal 7-cube crescent harvest cycle.
The indicator light on the ice maker flashes continuously, signaling the unit cannot complete a harvest cycle and needs replacement.
Cubes stick or melt together in the bin due to the ice maker dripping water between cycles from a worn mold heater or seal.
💡 Pro Tip: Is Your Ice Maker the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Ice maker has completely stopped producing ice despite correct freezer temperature (below 8 °F / -13 °C)
⚠️ Ice maker runs through a cycle but no water fills the mold — cubes never form
⚠️ Green indicator light on the ice maker flashes continuously without completing a harvest
⚠️ Ice maker leaks water into the freezer compartment or onto the floor
Quick test: Turn ice maker OFF for 15 seconds, power it back on, then press the paddle 3 times within 15 seconds. Within 3 minutes the unit should enter harvest mode — heater activates, the sweep arm completes one full revolution, and the mold fills with water. If this cycle does not complete, the ice maker assembly needs replacement.
📦 What's in the Box
✅ 1× Ice Maker Assembly (electromechanical, 10" × 5", 110V, 7-cube crescent harvest)
✅ 1× 4-pin round wire harness adapter
✅ 1× 6-pin wire connector
✅ 1× End-mounted fill cup
✅ 1× Fill tube
✅ 1× Power cord set
✅ 1× Installation instruction sheet
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.