Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Oven runs but produces no heat during bake cycle; element fails to glow red or reach temperature.
Food bakes unevenly or burns on one side; oven heats only from the top broil element when bake element is burned out.
Oven displays preheat cycle but never reaches the set temperature or takes excessively long to heat up.
Element shows visible holes, blisters, cracks, or burn marks indicating it has shorted out or burned through.
💡 Pro Tip: How to Diagnose a Failed Bake Element
Your part is likely the culprit if you notice any of the following:
⚠️ Oven runs but produces little or no heat on the bake setting
⚠️ Element does not glow red when the oven reaches temperature
⚠️ Visible holes, blisters, or burn marks on the element surface
⚠️ Oven takes much longer to preheat or never reaches set temperature
Use a multimeter to test the element for continuity after unplugging the range. A good element should read 16–24 ohms resistance. No continuity = failed element. Also test for continuity to ground — if present, inspect wiring before installing the new element.
📦 What's in the Box
✅ 1× Bake Element Assembly with Support Brackets (W10779716, 240V / 3600W, 20.5" W × 16.75" L, horizontal push-in terminals)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.