Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer completes the wash cycle but water remains standing in the tub — pump motor has failed or impeller is broken.
Unusual humming or grinding noise heard during the drain cycle indicates a seized or damaged pump motor.
Machine halts mid-cycle with water still in the drum and throws a drain-related error code on the display.
A small water leak at the front or underside of the washer cabinet caused by a cracked pump housing or failed pump seal.
Spin cycle runs but water is not fully expelled, leaving laundry excessively wet due to insufficient pump output.
💡 Pro Tip: How to Confirm Your Drain Pump Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Washer won't drain — water remains in the tub after the cycle ends
⚠️ Loud humming or grinding noise during the drain portion of the wash cycle
⚠️ Washer stops mid-cycle with water still inside and displays a drain error code
⚠️ Small water leak visible at the front or bottom of the machine
🔬 Diagnostic tip: Set your multimeter to the Rx1 continuity setting and probe the pump motor terminals. No continuity = failed motor. Drain pumps are not repairable — replacement is the only fix.
📦 What's in the Box
✅ 1× Drain Pump Assembly (120V ~ 60Hz, 0.95A, B40-3A motor) — complete unit ready to install
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.