Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The adjuster arm clip locks the rack adjuster into the selected height position. A broken or cracked clip causes the rack to drop back down immediately after adjustment.
When the clip loses its grip or snaps, the adjuster arm detaches from the dishrack rail entirely, making the upper rack impossible to use at different heights.
A missing or damaged clip allows the upper rack to shift side-to-side and tilt during wash cycles, causing dishes to move and resulting in poor wash performance.
A misaligned upper rack due to a faulty adjuster arm clip can block spray arm coverage, causing dishes on the upper rack to come out dirty or poorly rinsed.
💡 Pro Tip: Is Your Adjuster Arm Clip the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ The upper rack will not stay at the selected height and keeps dropping down
⚠️ The adjuster arm falls off or rattles loose during the wash cycle
⚠️ The upper rack wobbles side-to-side or tilts unevenly when loaded
⚠️ Dishes on the upper rack are coming out poorly cleaned due to misalignment
Visually inspect both left and right adjuster arm clips while the rack is pulled out. A cracked, snapped, or missing clip is immediately visible — if either side is damaged, replace both at the same time to ensure even support and prevent the issue from recurring.
📦 What's in the Box
✅ 1× Dishwasher Rack Adjuster Arm Clip (W10250160 / WPW10250160, BPA-free ABS, 250°F rated)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.