Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer does not begin a cycle even when the door appears fully closed — the faulty switch fails to signal the control board that the door is secured.
Control panel displays a DE1 or DE2 door error code, indicating the door lock switch is not completing the circuit properly.
Washer door fails to latch and lock at the start of a wash or spin cycle, causing the machine to halt before running.
Washer unexpectedly stops mid-cycle because the door lock switch intermittently loses contact and drops the door-closed signal.
Door remains locked after the cycle ends and cannot be opened, caused by a switch stuck in the locked position.
💡 Pro Tip: How to Diagnose a Faulty Door Lock Switch
Your part is likely the culprit if you notice any of the following:
⚠️ Washer displays DE1 or DE2 error code on the control panel
⚠️ Washer won't start even though the door appears fully closed
⚠️ Door fails to lock or unlock — stuck mid-cycle
⚠️ Washer shuts down unexpectedly mid-cycle due to loss of door signal
To confirm the switch is faulty, set your multimeter to continuity mode and probe the switch terminals with the door latch engaged. A good switch will show continuity; an open reading with the door closed confirms the switch has failed and needs replacement.
📦 What's in the Box
✅ 1× EBF61315802 Washer Door Lock Switch Assembly (black/gray/white plastic housing with integrated wire connector)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.