Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Ice maker stops making ice or produces significantly less than normal because the solenoid coil supplying water to the ice maker circuit has failed.
Door water dispenser delivers no water or a very weak flow due to the dispenser solenoid coil being stuck closed or burned out.
Water continues to drip or run continuously from the dispenser after releasing the paddle because the valve solenoid is stuck open and cannot close.
Ice maker overflows with excess water that re-freezes inside or outside the ice bin, caused by a valve solenoid that fails to fully close after each fill cycle.
Dispenser water flow rate drops dramatically or cuts out intermittently, indicating a partially obstructed or weakening solenoid that can no longer open fully.
💡 Pro Tip: How to Know Your Water Inlet Valve Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Ice maker stops producing ice entirely or produces far less ice than normal
⚠️ Water dispenser in the door delivers no water or only a weak trickle
⚠️ Ice maker overflows — excess water re-freezes inside or outside the ice bin
⚠️ Water continues to drip or run after releasing the dispenser paddle
🔍 Diagnostic tip: Before replacing the valve, confirm your household water pressure is adequate (20–120 psi). Low pressure can mimic a failed valve. Also check for kinked supply lines. If pressure is fine and lines are clear, test each solenoid coil for continuity with a multimeter — an open circuit (no continuity) confirms a dead coil and means the valve must be replaced, not repaired.
📦 What's in the Box
✅ 1× DA62-00914A Dual 2-Way Water Inlet Solenoid Valve (220–240V / 50Hz / 12A)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.