Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Faulty solenoid coils prevent the valve from opening fully. Replace the inlet valve assembly to restore normal fill speed and clear LG IE error codes.
A worn diaphragm or stuck-open solenoid causes the valve to drip continuously into the tub even when the washer is off. Replacing the valve stops the slow leak.
If the hot or cold side solenoid fails, the washer only fills with one temperature regardless of cycle setting. The full 5-coil assembly replaces both hot and cold inlet valves simultaneously.
Insufficient water flow triggers cycle interruption and error codes. A malfunctioning inlet valve that cannot regulate fill levels will cause the control board to halt operation.
The bleach dispenser valve and fabric softener valve are integrated into this 5-outlet assembly. If these dispensers fail to flush, the entire valve assembly needs replacement.
A valve that cannot close properly keeps filling the drum past the set water level. Replacing the assembly restores proper solenoid on/off control.
💡 Pro Tip: Is Your Inlet Valve the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills very slowly or not at all (LG IE error code)
⚠️ Water continuously drips into tub after cycle ends
⚠️ Hot or cold water only — wrong temperature during wash
⚠️ Washer stops mid-cycle or bleach/softener dispenser not flushing
Quick test: Unplug the washer when the symptom occurs. If water continues to fill the tub with the machine off, the inlet valve solenoid is stuck open and must be replaced immediately to prevent overflow damage.
📦 What's in the Box
✅ 1× AJU73213301 Water Inlet Valve Assembly (12V DC, 5-coil, 2-inlet / 5-outlet)
✅ 2× AGM73269501 Inlet Valve Screens (pre-filter mesh)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.