Whirlpool Dishwasher Mounting Bracket Parts — Models & Compatibility

Your Whirlpool dishwasher shouldn't rock back and forth when you load dishes or make scraping noises against the cabinet. That mounting bracket—the one that secures the unit to the countertop—takes a beating over the years. This hub covers the 8269145 mounting bracket that fits Whirlpool, KitchenAid, Maytag, Kenmore, and Amana dishwashers across dozens of model series.

Is This the Right Part for Your Model?

Check your dishwasher's model number on the label inside the door frame or along the top edge of the tub. Cross-reference it against the compatibility list below—this bracket works across WDF, WDT, DU, ADB, MDB, KDFE, and KUDE series models. The same bracket design has been used since the early 2000s with minor variations, so if your dishwasher was made by Whirlpool Corporation (which includes all the brands mentioned), you're likely in the right place.

About This Replacement Bracket

The 8269145 is the metal mounting bracket that anchors your dishwasher to the underside of your countertop. It typically bolts through pre-drilled holes in the dishwasher's frame and screws up into the cabinet base. Over time, these brackets can corrode (especially if you've had minor leaks), bend from improper installation, or simply wear out from the constant vibration of wash cycles. Replaces part numbers WP8269145, AP6012289, 830941, and PS11745496—so if you're cross-referencing an old service manual, any of those numbers will lead you here.

Compatible Model Series

This mounting bracket works across multiple Whirlpool Corporation brands. The most common series include the WDF (Whirlpool front-control models), WDT (Whirlpool top-control premium line), DU (classic Whirlpool built-ins), MDB (Maytag dishwashers), KDFE and KUDE (KitchenAid units), and ADB (Amana budget-friendly models). You'll find this same bracket referenced in service bulletins dating back over a decade.

When to Replace Your Mounting Bracket

If your dishwasher tips forward when you open the door fully loaded, that's your first sign. Other indicators: visible rust or corrosion on the existing bracket, stripped screw holes that won't hold tension anymore, or if you're reinstalling a dishwasher and the original bracket disappeared during a kitchen remodel. Sometimes installers over-tighten these brackets and crack them—you won't notice until months later when the unit starts shifting during operation.

What Comes in the Box

You're getting the metal mounting bracket itself. Mounting hardware (screws) may or may not be included depending on the packaging revision—have a few #8 wood screws on hand just in case. The bracket is pre-drilled with standard spacing that matches Whirlpool's mounting pattern used since the early 2000s.

Installation Overview

You'll need to pull the dishwasher out slightly to access the top mounting points. Locate the existing bracket (or the mounting holes if it's missing), align the new bracket, and secure it with screws through the dishwasher frame up into the countertop base. Most installations take 15-20 minutes if you've got clear access. The tricky part isn't the bracket itself—it's making sure your dishwasher is level before you lock everything down.

Cross-Reference Numbers

This part supersedes and replaces: WP8269145, AP6012289, 830941, PS11745496. If you're looking at a parts diagram or old repair receipt with any of those numbers, this is the updated replacement. Whirlpool consolidates part numbers periodically, but the physical bracket hasn't changed in design.

Price and Availability

Currently available at $13.99. That's significantly cheaper than calling a service tech for a bracket replacement, which would run you $100+ including the trip charge. This is one of those repairs where the part cost is minimal but the labor markup is steep—good candidate for DIY if you're comfortable with basic tools.