Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Clears the LE (locked rotor) error on LG and Kenmore front-load and top-load washers caused by a failed rotor position sensor unable to report motor speed to the control board.
Resolves EO fault codes triggered when the hall sensor loses signal continuity, preventing the control board from verifying rotor movement.
Restores full spin cycles when a defective RPS fails to send rotation data, causing the control board to cut motor power as a safety precaution.
Fixes no-agitate conditions where the drum reversal sequence stalls because the sensor cannot confirm directional rotor position.
Eliminates sluggish or stuttering drum rotation caused by erratic signal output from a worn or heat-damaged hall sensor element.
Stops the loud humming or grinding sound that occurs when the motor hunts for a valid RPS signal and repeatedly attempts to lock onto rotor position.
💡 Pro Tip: Is Your Rotor Position Sensor Faulty?
Your part is likely the culprit if you notice any of the following:
⚠️ LE (locked rotor) or EO error code displayed on the control panel
⚠️ Washer drum will not spin or agitate at all
⚠️ Drum spins very slowly or hesitates mid-cycle
⚠️ Loud humming or grinding noise when the motor attempts to turn
🔍 Diagnostic tip: Unplug the washer the moment symptoms appear. Use a multimeter to test the three-pin connector on the sensor — a shorted or open circuit confirms the sensor has failed. Also inspect the wire harness (6877ER1016F) for damaged pins before replacing the sensor, as a poor harness connection can mimic a dead RPS.
📦 What's in the Box
✅ 1× Rotor Position Sensor Assembly (2.9" × 2.2", white, part 6501KW2002B)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.