




Worn or flat-spotted drum rollers cause rhythmic thumping or rumbling sounds during every cycle. Replacing all 4 rollers restores whisper-quiet operation.
Dry, degraded roller bearings generate high-pitched squealing noise. New self-lubricating rollers eliminate the squeal immediately.
Severely worn rollers can seize or collapse, preventing the drum from rotating even when the motor is running.
A dragging or wobbling drum caused by bad rollers increases friction, slowing drum rotation and reducing drying efficiency.
Cracked or broken roller wheels cause the drum to wobble side-to-side during rotation, leading to uneven tumbling and potential drum damage.
💡 Pro Tip: Is Your Drum Roller the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Loud thumping, rumbling, or squealing noise during the drying cycle
⚠️ Drum feels wobbly or unsteady when rotated by hand
⚠️ Dryer takes much longer than normal to dry a load
⚠️ Drum stops spinning or fails to tumble even though the motor runs
👨🔧 Technician Tip: Always replace all 4 drum rollers at the same time. Rollers wear at similar rates, so replacing only one often leads to repeat failures within months. While the dryer is open, inspect the drum belt and idler pulley — pairing replacement parts 4400EL2001A (belt) and 4561EL3002A (idler pulley) is a smart preventive move that saves labor on future repairs.
📦 What's in the Box
✅ 1× Drum Support Roller & Shaft Assembly (compatible with 4581EL2002A / 4581EL2002C / 4581EL2002H spec)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.