





Dryer makes loud squeaking, squealing, or rumbling noises while running — caused by worn drum support rollers or a failing idler pulley bearing.
Motor runs but drum does not rotate — typically caused by a broken or stretched drive belt (341241) that has snapped or slipped off.
Rhythmic thumping or clunking noise during operation indicates flat spots or worn bearings on drum support rollers.
Drum hesitates or stops mid-cycle due to a worn idler pulley losing belt tension, preventing consistent drum rotation.
Uneven tumbling from worn rollers causes clothes to clump or wrap around the drum, reducing drying efficiency.
💡 Pro Tip: Diagnosing a Worn Dryer Drive System
Your part is likely the culprit if you notice any of the following:
⚠️ Loud squeaking, squealing, or rumbling noises while the drum is turning
⚠️ Drum has completely stopped rotating even though the motor is running
⚠️ Clothes becoming tangled or unevenly tumbled inside the drum
⚠️ Thumping or clunking sound coming from the rear of the dryer cabinet
Pro Tip: When installing, apply 2–3 drops of turbine oil to each roller shaft and the idler pulley shaft before reassembly. This reduces initial break-in wear and extends part life significantly. Also take the opportunity to clean out accumulated lint from the motor and heater area while the drum is removed.
📦 What's in the Box
✅ 1× Drive Belt 341241 (92-1/4" × 1/4", 4-rib)
✅ 2× Drum Support Rollers 349241T
✅ 1× Idler Pulley WP691366
✅ 4× Roller Tri-Rings
✅ 1× Retaining Clip
✅ Installation Instructions
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.