Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Belt is broken or has slipped off the pulley — drum sits motionless while motor runs. Replacing the belt immediately restores tumbling action.
Without drum rotation, clothes sit in a pile and never tumble through the heated air, leaving loads wet after a full cycle.
A worn, frayed, or partially broken belt creates irregular thumping or slapping sounds during operation before it snaps completely.
Many models use belt tension to close a safety switch; a broken belt causes the dryer to stop running as soon as it starts.
💡 Pro Tip: Is Your Dryer Drum Belt the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer drum does not turn or spin when the motor is running
⚠️ Dryer runs but clothes come out still wet with no tumbling action
⚠️ Loud thumping, squealing, or slapping noise during operation
⚠️ Dryer starts but shuts off immediately because the broken belt trips the door switch interlock
Quick check: Open the dryer door and manually try to spin the drum. If it spins freely with zero resistance, the belt is likely broken. Reach into the drum cavity and feel for the belt — a broken one will be loose or missing entirely. Always unplug the dryer before inspecting.
📦 What's in the Box
✅ 1× Dryer Drum Drive Belt (93-3/8" L × 3/8" W, 5-Rib / 4-Groove, Black Rubber)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.