Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer agitates normally but drum will not enter the spin cycle — classic symptom of a failed lid switch that no longer signals 'lid closed' to the control board.
Machine fills with water but will not begin agitation or any cycle, even with lid firmly closed — the switch has lost electrical continuity.
Washer halts partway through a wash or rinse cycle without the lid being opened — intermittent switch failure causing false 'lid open' signal.
Neither agitation nor spin occurs after cycle start — complete switch failure preventing the control system from releasing the motor.
Visible physical damage to the switch housing caused by repeated lid slamming, preventing the lever mechanism from actuating correctly.
💡 Pro Tip: How to Diagnose a Failed Lid Switch
Your part is likely the culprit if you notice any of the following:
⚠️ Washer won't start even though the lid is fully closed
⚠️ Drum agitates normally but refuses to spin or enter the spin cycle
⚠️ Cycle stops mid-wash without the lid being opened
⚠️ Visible cracks or physical damage on the switch body near the lid hinge
🔬 Confirm with a multimeter: set to continuity mode, depress the switch lever by hand — a good switch clicks and shows continuity; no continuity means replace it. Always unplug the washer before testing or replacing.
📦 What's in the Box
✅ 1× Washer Lid Switch Assembly (3355806 / WP3355806 equivalent, with integrated wire harness connector, approx. 0.15 lbs)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.