Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Oven does not produce any heat in bake mode; element fails to glow red or get warm.
Food is undercooked or overcooked in certain spots; inconsistent temperature across the oven cavity.
Element is powered but remains cold; often caused by a burned-through coil or open circuit in the heating wire.
Oven takes excessively long to reach the set temperature because the element is partially failed and losing wattage output.
Physical cracks, blistering, arcing, or a hole in the element coil confirm the element has burned out and must be replaced.
💡 Pro Tip: Diagnosing a Failed Bake Element
Your part is likely the culprit if you notice any of the following:
⚠️ Oven reaches no heat at all or heats far below the set temperature
⚠️ Food is undercooked on the bottom while the top browns normally
⚠️ Visible burn spots, cracks, blisters, or a hole in the element coil
⚠️ Oven trips the breaker or displays an F-code error when bake is selected
🔍 Confirm failure: set a multimeter to Rx1 and probe the two element terminals. A healthy 2600 W / 240 V element reads approximately 22 Ω. An open circuit (infinite resistance) means the element has burned through and must be replaced.
📦 What's in the Box
✅ 1× Oven Bake Element (2600 W / 240 V, 19" W × 15" L, push-on terminals)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.