Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer drum spins normally but produces no heat — the blown thermal limiter has cut power to the heating element.
Dryer completely fails to start after an overheating event — the open thermal fuse has interrupted the circuit.
Dryer stops prematurely before clothes are dry, indicating the fuse is on the verge of failure due to restricted airflow or elevated temperatures.
Dryer produces weak heat and takes multiple cycles to dry a load — partially degraded thermal limiter causing intermittent power interruption to the heater.
💡 Pro Tip: How to Know If Your Thermal Fuse Has Blown
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces zero heat — drum spins normally but clothes stay wet
⚠️ Dryer won't start at all after a recent overheating event
⚠️ Dryer shuts off prematurely mid-cycle before clothes are dry
⚠️ Multimeter shows no continuity across the thermal limiter terminals
🔍 Before replacing, always check your exhaust vent and lint screen for blockages — a clogged vent is the #1 root cause of repeated thermal fuse failures. If this is your third replacement, restricted airflow is almost certainly the culprit.
📦 What's in the Box
✅ 1× Inlet Thermal Fuse / Thermal Limiter (137032600, rated 275°F, non-resettable)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.