How to Replace AAP73252202 Refrigerator Door Bin on LG and Kenmore Refrigerators — Step-by-Step

You open your LG refrigerator to grab the milk, and that door bin finally gives up — cracked plastic sends bottles tumbling to the floor. If you've got an LFX25991ST, LFX31925ST, or any of the dozen other French door models using the AAP73252202 door bin, this is probably the easiest fix you'll tackle all year.

This bin sits in the middle or lower section of your door, holding everything from condiments to juice cartons. When the plastic cracks or the mounting tabs break off, the whole thing becomes useless. Good news? You don't need tools, you don't need to unplug anything, and you'll be done in under five minutes.

What You Need Before Starting

Tools required: None — this is a tool-free replacement

Time estimate: 3-5 minutes

Difficulty: Easy — If you can open your fridge, you can do this repair

What you're replacing: The AAP73252202 replaces part numbers AAP73252201, AAP73252211, AP5602939, and PS3637058. It's the clear or white plastic bin that snaps into mounting brackets on your refrigerator door.

Safety First

This is about as safe as appliance repairs get. You don't need to unplug the refrigerator or move it away from the wall. Just make sure you've removed all items from the broken bin before you start pulling on it. The mounting tabs can be sharp if they've cracked, so watch your fingers when handling the old bin.

Step 1: Empty and Remove the Old Door Bin

Take everything out of the broken bin first. Grab both ends of the bin firmly and lift straight up. The bin sits on plastic tabs that hook into slots on the door liner. If it's cracked but still attached, you might need to flex it slightly to unhook the tabs. Some models have the bin sitting in a metal or plastic bracket — just lift the whole thing out together. Don't yank sideways; straight up is the key.

Step 2: Check the Door Mounting Brackets

Look at the mounting points where the old bin was sitting. You'll see either two L-shaped plastic tabs or a metal bracket assembly. Make sure these aren't cracked or broken. If the tabs on the door itself are damaged, you'll need to order those separately — but 95% of the time, it's just the bin that fails. Wipe down the area while you're at it. Years of spills tend to collect under these bins.

Step 3: Align the New AAP73252202 Bin

Take your new bin out of the packaging. You'll see slots or tabs on the underside that match the mounting points on your door. Hold the bin level and position it directly above where it needs to go. On most LG French door models like the LFX31925ST or LFXS30726S, the bin sits at a slight angle — the back edge sits lower than the front. Line up the back tabs first.

Step 4: Snap the Bin Into Place

Press down firmly on both ends of the bin simultaneously. You should hear or feel a distinct snap when the tabs engage. Give it a gentle tug upward to make sure it's seated properly. The bin shouldn't wobble or lift out easily. If it feels loose, lift it back out and try again — the tabs need to fully engage in their slots.

Testing After Installation

Load the bin with a few items — a couple of bottles or jars with some weight. Open and close the door a few times. The bin should stay firmly in place without rattling or shifting. Try lifting up on the front edge slightly. It should resist movement and feel solid. If you notice any flexing or the bin pops out, remove it and reinstall, making sure the back tabs are fully seated before pressing down the front.

Compatibility Check

The AAP73252202 works across multiple LG and Kenmore refrigerator series. Confirmed models include the LFX25991ST, LFX31925ST (all color variants), LFX31935ST, LFX33975ST, LMX31985ST, LFXC24726S, LFXS30726S, LFXS32726S, LMXC23746D, LMXS30746S, and LFCS31626S. For Kenmore models, look for 795.72042112, 795.72042313, 795.72053118, 795.73153610, and the 795.7402541 series. If your model number starts with those prefixes, you're good to go.

Frequently Asked Questions

Will this bin fit my side-by-side LG refrigerator?

No, the AAP73252202 is specifically designed for LG French door refrigerators and matching Kenmore models. Side-by-side and top-freezer models use different bin designs with different mounting systems. Check your model number against the compatibility list — if it's not an LFX, LFXS, LFXC, LMX, or LFCS series, this isn't your part.

The bin feels loose after installation — what am I doing wrong?

Make sure you're pressing down on both ends of the bin at the same time until you feel it snap into place. The back tabs need to engage first, then the whole bin locks down. If one side snaps in before the other, it'll feel wobbly. Also check that the door mounting brackets aren't cracked — if the tabs on the door itself are broken, a new bin won't help.

Can I just glue the cracked bin instead of replacing it?

You can try, but it won't hold up. These bins carry a lot of weight when loaded with bottles and jars, plus they flex every time you open the door. Super glue or plastic epoxy might work for a week or two, but the stress will crack it again. At $65.99, a genuine replacement bin that'll last another 10 years is worth it compared to constantly repairing a failed one.