How to Replace 240351601 Freezer Door Shelf Bin on Frigidaire Side-by-Side Refrigerator — Step-by-Step

You open your Frigidaire freezer door and a door bin cracks off in your hand, dumping frozen vegetables across the kitchen floor. Or maybe you bought a house and discovered the previous owners stripped out all the door bins before moving. Either way, you're left with a freezer door that can't hold anything properly. The 240351601 freezer door shelf bin is one of those parts that seems simple until you realize it's essential for organizing your frozen goods — and when it's missing or broken, your entire freezer becomes a chaotic mess.

Here's the good news: replacing this bin takes about 5 minutes and requires zero tools. It's a straightforward snap-in part that even first-time DIYers handle without breaking a sweat. This guide walks you through the entire process for Frigidaire, Kenmore, and Electrolux side-by-side models including FRS26H5ASB5, FRS26RLECS0, FFHS2611LB, and dozens of others.

What You Need Before Starting

• Replacement bin: Part number 240351601 (replaces AP2115974, 240351607, PS430027)
• Tools required: None — this is a hand-install only
• Time needed: 5 minutes
• Difficulty: Easy

This bin typically installs on the left-hand freezer door of side-by-side models, usually in the lower three positions. If you're replacing multiple door bins, check your model's layout — the upper freezer bin uses a different part number (240334201), while the refrigerator side uses different bins entirely.

Safety First

Warning: You don't need to unplug your refrigerator for this repair, but you should remove all items from the freezer door bins before starting. Frozen items are heavy, and a bin loaded with ice cream cartons can slip during removal and land on your foot. Also, check that the new bin isn't frozen from warehouse storage — cold plastic is more brittle and can crack if you force it into position. Let it reach room temperature first.

Step 1: Empty and Remove the Old Bin

Open your freezer door fully and remove everything from the bin you're replacing. Look at the sides of the bin where it connects to the door — you'll see molded tabs that snap into slots on the door liner. Grip the bin firmly with both hands, one on each side. Pull straight out with steady pressure. The tabs should release from the door slots and the bin will come free. If it's stuck from ice buildup, don't force it — wipe down the mounting area with a warm cloth first.

Step 2: Inspect the Door Mounting Slots

With the old bin removed, look at the door liner where the bin was mounted. You'll see rectangular slots molded into the plastic. Check these slots for cracks, ice buildup, or debris. Wipe them clean with a damp cloth. If the slots themselves are cracked or broken, you've got a bigger problem — the door liner would need replacement. But in most cases, the slots are fine and ready for the new bin.

Step 3: Position the New Bin

Take your new 240351601 bin and examine the side tabs. They should match the shape of the mounting slots you just cleaned. Hold the bin at a slight angle to the door, lining up the tabs with the slots. Start with one side first — insert that side's tabs into the slots, then flex the bin slightly to align the other side. As one reviewer noted, "Replacing broken door parts is a breeze" — and they're right, once you see how these tabs align.

Step 4: Snap the Bin Into Place

With both sides aligned, push firmly on the bin until you hear or feel it snap into position. The tabs should lock completely into the door slots with no gaps. Tug gently on the bin to test the connection — it shouldn't move or flex. If one side seems loose, remove the bin and reinstall it, making sure both sides engage simultaneously. The fit should be snug and solid.

Step 5: Load Test the Installation

Don't just assume it's installed correctly — test it. Place a few frozen items in the bin, something with decent weight like a bag of frozen vegetables or a carton of ice cream. Close the freezer door and reopen it a few times. The bin should stay firmly in place without rattling or shifting. If it pops loose, you didn't fully seat the tabs. Remove and reinstall.

Testing After Installation

Once you've confirmed the bin is secure, reload it with your frozen items. Check that the bin doesn't interfere with the freezer door closing properly — it should sit flush against the door liner. Open and close the door several times over the next few hours to ensure the bin stays put under normal use. If you're replacing multiple bins (common when you've bought a house missing all the door bins), install them one at a time from bottom to top, testing each one before moving to the next.

Frequently Asked Questions

I bought a house with no door bins in the Frigidaire refrigerator. How do I know which bins to order?

This is more common than you'd think. For most Frigidaire side-by-side models, the left freezer door uses three 240351601 bins in the lower positions and one 240334201 bin at the top. The right refrigerator door typically uses 240356402 for the two upper bins and 240323002 for the lower two bins. However, these configurations vary by model, so check your model number against the parts diagram or contact customer service with your serial number for exact confirmation.

Will this bin fit both the refrigerator side and freezer side of my side-by-side?

No. The 240351601 is specifically designed for the freezer door on Frigidaire side-by-side units. The refrigerator door uses different bin designs with different part numbers. Don't try to force a freezer bin onto the refrigerator side — the mounting points won't line up, and you'll crack the plastic.

My new bin doesn't snap in smoothly. What am I doing wrong?

First, make sure the bin has reached room temperature — cold plastic from shipping doesn't flex as easily and feels harder to install. Second, check that you're aligning both side tabs simultaneously. If you push one side in first and then try to force the other side, the bin will twist and resist snapping in. Hold it evenly and press both sides together. If it still won't seat, inspect the door liner slots for ice buildup or damage that might be blocking the tabs.