How to Replace 240323001 Refrigerator Bottom Door Bin on Frigidaire — Step-by-Step

Your refrigerator door bin just cracked when you set down a gallon of milk. It happens — door bins take constant abuse from heavy bottles, and the plastic eventually gives out. If you've got a Frigidaire model like the FRS6HR4HW6 or FRS6R4EW2, the 240323001 bottom door bin is a straightforward replacement that'll have your fridge door organized again in minutes.

What You Need Before Starting

This is one of the simplest refrigerator repairs you'll tackle. You don't need tools — just your hands and a couple minutes. Here's what makes this job easy:

• No tools required
• Estimated time: 2-3 minutes
• Difficulty: Beginner
• No need to unplug the refrigerator

Safety First

Remove all items from the broken bin before attempting removal. Glass bottles or jars can shift unexpectedly when you're working the bin out of its slots. If the bin is cracked with sharp edges, wear work gloves to avoid cuts. That's it — this repair has minimal safety concerns.

Step 1: Empty the Damaged Bin Completely

Take everything out of the bin. This seems obvious, but you'd be surprised how often people try to remove a loaded bin and end up with broken condiment jars all over the floor. Clear it completely.

Step 2: Lift and Angle the Old Bin Out

The bin sits in retaining slots on the door. Grip the bin firmly on both sides. Lift it straight up about half an inch until you feel it clear the lower retaining tabs, then angle the bottom out toward you. The bin should pull free easily. If it's stuck, it's usually because one side hasn't cleared the tab — lift a bit higher on that side.

Step 3: Inspect the Door Mounting Area

Before installing the new bin, look at the slots where the old bin sat. Wipe away any spills, crumbs, or sticky residue with a damp cloth. Check that the retaining tabs aren't damaged. These tabs are molded into the door itself — if they're broken, you've got a bigger problem, but that's rare.

Step 4: Install Your New 240323001 Bin

Hold your new bin at a slight angle with the back edge higher than the front. Align the rear mounting tabs with the slots in the door. Slide the back edge in first, then rotate the bin toward the door until it's vertical. Push down firmly until you hear or feel it click into the lower retaining tabs. Give it a gentle tug — it shouldn't move more than a tiny bit.

Step 5: Load Test the Installation

Don't just assume it's secure. Put something moderately heavy in the bin — a couple of condiment jars or a carton of orange juice. Open and close the door a few times. The bin should stay firmly in place without rattling or shifting. If it feels loose, remove it and reinstall, making sure you heard that click.

Testing After Installation

Your door bin replacement is complete. The bin should sit flush against the door with no gaps at the bottom. Load it normally and monitor for the first day or two. With this part (240323001), compatibility is critical — it works with Frigidaire, Kenmore, and Electrolux models including the FRS6HR35KW1, FRS6R5EMB6, and FRS6HR35KS2. If your bin doesn't click in properly, double-check your model number against the compatibility list.

Frequently Asked Questions

Will this bin fit all Frigidaire side-by-side refrigerators?

No — it's designed for specific models in the FRS6 series. Check your model number on the label inside your fridge (usually on the left wall or ceiling). Common compatible models include FRS6R4EW0, FRS6HR5JW0, and FRS6HR35KM0. If your model starts with something other than FRS6, verify compatibility before ordering.

Why does my door bin keep falling out?

If you've installed the correct replacement and it won't stay in, the retaining tabs molded into the door liner might be damaged. This happens after years of repeatedly overloading the bin. Inspect the tabs closely — if they're cracked or broken off, you may need a door liner replacement, which is a much bigger job. Sometimes twisting the bin slightly during installation helps it catch properly.

Can I repair my cracked bin instead of replacing it?

Plastic epoxy or JB Weld might hold for a while, but door bins flex constantly from opening and closing. The repair rarely lasts more than a few weeks. At $32.99, the replacement bin is cheaper than dealing with another gallon of milk hitting your kitchen floor when the repair fails. Replace it and be done.