How to Replace 2187172 Refrigerator Door Shelf Bin on Whirlpool Kenmore Amana Maytag — Step-by-Step

Your fridge door won't close properly because a cracked shelf bin is sticking out half an inch. Or maybe the bin fell off completely, and now your condiment bottles are rolling around the bottom of the fridge. The 2187172 door shelf bin fails when the plastic mounting tabs crack from years of being loaded with heavy bottles and slammed shut. One customer put it perfectly: "I was a bit worried I may not find the part I needed (refrigerator door shelf) But I did! It was quick, easy, prompt delivery and it fits perfectly."

What You Need Before Starting

This is genuinely one of the easiest refrigerator repairs you'll ever do. No tools required — this is a snap-in, snap-out replacement. Here's what you need:

• Replacement 2187172 door shelf bin
• Empty bottles or jars from the old bin
• Maybe a towel (in case there's spilled liquid in the bin)

Repair time: 2-5 minutes
Difficulty: EASY — No experience needed

Safety First

You don't need to unplug the refrigerator for this repair. The only risk is dropping the bin and cracking it further or spilling whatever sticky residue has accumulated over the years. Remove all bottles and jars before attempting removal — a full bin is heavier than you think and harder to maneuver.

Step 1: Empty the Shelf Bin Completely

Take everything out of the old bin. If the bin is cracked or leaking, check the door liner behind it for any liquid that may have dripped down. Wipe it clean now — you won't want to reach behind the new bin once it's installed.

Step 2: Locate the Mounting Tabs

Look at how the old bin attaches to the door. You'll see two hook-style tabs at the top that slide into slots in the door liner, and usually two snap-in tabs at the bottom. The top tabs are what typically crack first. If your bin won't stay in place or tilts forward, those top tabs are broken.

Step 3: Remove the Old Bin

Lift the bin straight up and slightly forward. The bottom tabs will flex out of their slots, and the top hooks will slide free. Don't force it — if it's stuck, you're probably pushing down instead of up. The bin should come off with minimal effort. If the old bin is cracked into pieces, you might need to remove the bottom section separately.

Step 4: Install the New 2187172 Shelf Bin

Line up the top hooks of the new bin with the slots in the door liner. Slide the hooks into place, then press the bottom of the bin firmly toward the door until you hear or feel the bottom tabs snap into their slots. Give the bin a gentle tug downward — it shouldn't move at all. As one installer noted, "Eassy fix Arrived fast and fit like it shoud." The fit is exact on compatible models like the Whirlpool ED5KVEXVQ00, Amana ASD2575BRW00, and Kenmore models listed for this part.

Step 5: Load It Up and Test

Put your bottles back in the bin. Close the refrigerator door firmly — the bin should not interfere with the door gasket or prevent a full seal. If the door won't close completely, the bin might not be snapped in all the way at the bottom. Remove it and reinstall, making sure you hear that definite click.

Testing After Installation

Open and close the door several times with weight in the bin. The new bin should stay firmly in place with no flexing or popping sounds. Check that the door gasket seals completely around the entire perimeter — a poorly seated bin can push against the gasket and cause the door to leak cold air, which leads to ice buildup and reduced cooling efficiency.

Frequently Asked Questions

Will this bin fit my Kenmore refrigerator if it's not on the compatibility list?

Check your refrigerator's model number against the full compatibility list on the product page. The 2187172 fits dozens of Whirlpool, Kenmore, Amana, and Maytag side-by-side models. If your current bin has the part number WP2187172, AP6006028, 2187194K, or PS11739091 stamped on it, this replacement will fit perfectly.

Why did my door shelf bin crack in the first place?

The mounting tabs take all the stress every time you load the bin or shut the door. Heavy glass bottles, repeated impacts from closing the door, and years of temperature cycling make the plastic brittle. The top tabs crack first because they bear the most weight. Once one tab fails, the bin tilts and puts even more stress on the remaining tabs — then the whole thing breaks.

Can I repair the old bin with glue instead of replacing it?

Don't bother. Plastic glue won't hold up to the weight and stress, especially with repeated door openings. You'll end up with condiment bottles on your kitchen floor when the repair fails at 2 AM. A new bin costs less than the bottles you'll break, and as one customer confirmed, it's "great part" that fits right the first time.