How to Replace 137006200 Pedestal Drawer Latch on Frigidaire Electrolux Washer — Step-by-Step

Your Frigidaire or Electrolux washer pedestal drawer won't stay closed anymore. Every time you try to push it in, it pops back open or won't latch at all. This is the classic sign of a failed drawer latch — part 137006200. The good news? You don't need a service call. One customer said it best: "Easy repair" — and they're right. This latch replacement takes about 15 minutes and requires zero disassembly of your washer.

What You Need Before Starting

This is one of the simplest washer pedestal repairs you'll tackle:

• Phillips head screwdriver
• Flathead screwdriver (optional, for prying)
• New 137006200 pedestal drawer latch

Repair Time: 10-15 minutes
Difficulty: ● Easy — Perfect for first-time DIYers

Safety First

You don't need to unplug the washer for this repair since you're working on the pedestal drawer only. However, pull the drawer completely out to give yourself room to work. Keep track of the mounting screws — they're small and easy to lose on laundry room floors.

Step 1: Remove the Pedestal Drawer Completely

Pull the drawer out as far as it'll go. Look for the release tabs on both sides near the back of the drawer rails. Press these tabs inward while pulling the drawer toward you — it should slide completely free. Set it on a flat surface where you can work comfortably.

Step 2: Locate the Failed Latch Assembly

Flip the drawer over or look at the top front edge — you'll see the latch mechanism mounted in the center. It's held in place by two Phillips screws. This is what's preventing your drawer from closing properly. On models like the EPWD157SIW0 and EPWD15IW2, the latch is identical and mounts the same way.

Step 3: Remove the Old Latch

Using your Phillips screwdriver, remove both mounting screws holding the latch in place. The old latch should pull straight out. If it's stuck, gently wiggle it side to side while pulling. You might notice the internal spring mechanism is broken or the plastic catch is cracked — that's why your door won't close.

Step 4: Install the New 137006200 Latch

Position the new latch exactly where the old one sat. The catch mechanism should face toward the front of the drawer. Insert both mounting screws and tighten them firmly, but don't overtighten — you're threading into plastic. As one customer noted, the part "fit exactly as if it was original." The holes should line up perfectly.

Step 5: Reinstall the Drawer and Test

Slide the drawer back onto the pedestal rails. You'll hear a click when it's properly seated. Now push the drawer closed — you should feel the new latch engage with a satisfying click. Open and close it several times to make sure it catches reliably every time.

Testing After Installation

Close the drawer firmly and try to pull it back open without pressing the release button. If the latch is working correctly, the drawer should stay shut. Press the release button — the drawer should pop open smoothly. Test this 5-6 times to confirm the spring mechanism is functioning properly. The drawer should close with moderate pressure, not slam shut or feel loose.

Frequently Asked Questions

Will this latch fit my Electrolux pedestal drawer?

Yes, the 137006200 latch works across dozens of Frigidaire and Electrolux washer pedestal models including EPWD157SIW0, EPWD15IW3, EPWD15SS2, and many others. If your pedestal is a front-load washer model from 2008-2020, this is likely your latch.

What if my drawer still won't close after replacing the latch?

Check the catch plate on the pedestal frame itself — that's the piece the latch hooks into. If it's bent or broken, the new latch won't help. Also verify the drawer rails are seated properly. Sometimes drawers get knocked off track, preventing proper alignment with the latch mechanism.

Can I replace just the latch spring instead of the whole assembly?

Not practically. The 137006200 is sold as a complete latch assembly, and trying to disassemble it to replace internal components usually breaks the plastic housing. At this price point, replacing the entire latch is faster and more reliable than attempting a spring replacement.