Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The lid latch signals the control board that the lid is securely closed. If the latch is faulty, the washer will not initiate any cycle even when the lid appears shut.
Most top-load washers require a confirmed lid-lock signal before spin or agitation begins. A broken latch interrupts this signal, stopping the spin cycle entirely.
A worn latch mechanism can prevent the lid from latching properly or leave it stuck in the locked position after the cycle, making it impossible to retrieve laundry.
Control boards on Whirlpool, Maytag, and Kenmore washers display lid-lock fault codes when the latch switch fails to confirm closure within the expected time window.
💡 Pro Tip: How to Tell If Your Lid Latch Is the Problem
Your part is likely the culprit if you notice any of the following:
⚠️ Washer won't start even though the lid appears closed
⚠️ Control panel displays a door/lid error code or lid-lock indicator stays off mid-cycle
⚠️ Machine fills but refuses to agitate or spin (lid-lock signal never confirmed)
⚠️ Lid pops open during a high-speed spin cycle, or lid stays locked after the cycle ends
🔍 Quick multimeter check: Disconnect the wiring harness from the main control board, probe the yellow and white terminals. A healthy latch reads 85–150 Ω. Any reading outside that range confirms latch failure — replace it.
📦 What's in the Box
✅ 1× W10482836 / WPW10482836 Washer Door Latch Assembly with integrated wiring harness (120V, 85–150 Ω spec)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.