Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Worn drum support rollers are the leading cause of loud rumbling, squeaking, or squealing sounds during a dryer cycle. Replacing both rollers restores quiet operation.
A seized or broken roller can prevent the drum from spinning properly, leaving clothes wet even though the motor is running.
When rollers are worn flat or cracked, the drum may drag or wobble, reducing airflow efficiency and extending drying time significantly.
A completely failed roller can jam the drum, causing excessive motor load that trips thermal protection or prevents the dryer from starting at all.
💡 Pro Tip: Is Your Drum Roller the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer makes a loud rumbling, squeaking, or squealing noise during operation
⚠️ Drum fails to tumble or spin even when the motor runs
⚠️ Dryer takes much longer than normal to dry clothes
⚠️ Dryer will not start at all
Pro Tip: Since both rear drum rollers wear at the same rate, always replace them as a pair. While the drum is out, it's also a great time to inspect the drive belt, idler pulley, front/rear felt seals, and clear any lint build-up from inside the cabinet and vent.
📦 What's in the Box
✅ 1× Drum Support Roller (3"L × 1"W × 3"H, with metallic center bearing, rubber/metal/plastic construction)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.