How to Replace 240363701 Refrigerator Door Shelf Bin on Frigidaire — Step-by-Step

You reach for the milk and hear that familiar crack. Your Frigidaire refrigerator door bin just gave up after years of holding gallon jugs and condiment bottles. The good news? Replacing part 240363701 is one of the simplest refrigerator repairs you'll ever do — no tools required, just a couple minutes of your time.

What You Need Before Starting

This is genuinely a tool-free repair. Here's what you'll need:

• Your replacement 240363701 door shelf bin
• A clear countertop to set the old bin on
• Maybe an extra pair of hands if you're storing heavy items in the bin

Estimated time: 5-10 minutes

Difficulty level: Beginner-Friendly — Perfect first DIY repair

Safety First

The biggest hazard here is dropping bottles or jars when you remove the old bin. Empty the bin completely before you start working. You don't need to unplug the refrigerator or turn off any power — this is purely a mechanical swap. If the bin is cracked but still holding items, support it from underneath as you lift it out to prevent collapse.

Step 1: Empty the Door Bin Completely

Remove everything from the damaged bin. Yes, even that expired salad dressing hiding in the back. This prevents spills and makes the bin much lighter to handle. Set all items on your counter temporarily.

Step 2: Locate the Mounting Tabs

Look at the ends of your current bin. You'll see plastic tabs or hooks on each side — usually one tab at the top and one at the bottom on each end. These tabs slide into slots molded into the refrigerator door. On most Frigidaire models like the FFHS2311 series, the tabs face toward the back of the door.

Step 3: Remove the Old Bin

Grip both ends of the bin firmly. Lift straight up while pulling slightly away from the door. The bottom tabs will release first, then the top tabs will slide out of their slots. If it feels stuck, you're probably pulling at an angle — try lifting more vertically. The bin should come free without any force.

Step 4: Clean the Mounting Area

While the bin is out, wipe down the door area where the bin sits. You'll likely find crumbs, dried spills, or sticky residue. A damp cloth with mild dish soap works perfectly here. Dry the area completely before installing the new bin.

Step 5: Install the New 240363701 Bin

Hold your new bin at a slight angle with the tabs aligned with the door slots. Insert the top tabs first, sliding them into the upper slots. Then push the bin toward the door while lowering it — the bottom tabs will snap into place. Give the bin a gentle tug to confirm it's secure. It shouldn't wiggle or feel loose.

Testing After Installation

Load a few items back into the bin, starting with lighter bottles. Open and close the refrigerator door several times. The bin should stay firmly in place without rattling or shifting. Try loading a gallon jug if that's what you typically store — the bin is designed to handle it. If you hear any clicking or the bin feels unstable, remove it and reinstall, making sure all four tabs are fully seated.

Frequently Asked Questions

Will 240363701 fit my Kenmore or Gibson refrigerator?

Yes, this bin is compatible with multiple brands including Frigidaire, Kenmore, Gibson, and Crosley models. It replaces part numbers AP2116105, 240363707, 891286, and PS430206. Check your refrigerator model number against the compatibility list — common fits include FFHS2311 and FFHS2313 series units.

Why did my original door bin crack?

Door bins crack from repeated stress — opening and closing the door thousands of times, especially when loaded with heavy items. Temperature fluctuations make the plastic more brittle over time. Overloading the bin with items heavier than gallon jugs accelerates failure. It's normal wear and tear after several years of use.

Can I repair a cracked bin instead of replacing it?

Not reliably. Plastic adhesives and epoxies rarely hold up to the constant temperature changes and weight stress inside a refrigerator. You might get a few weeks from a repair attempt, but the crack will spread. At $36.99, replacing the bin is faster and more dependable than trying to glue it back together.