


The door catch is the female latch on the door that locks onto the strike pin on the front panel. When the plastic housing cracks or the internal spring jaws wear out, the door pops open during or right after loading.
Most Whirlpool-family dryers use a door switch interlock — if the catch cannot fully engage the strike, the door switch stays open and the dryer refuses to start even when the door appears closed.
A healthy catch gives a firm, audible click when the door closes. If the door swings shut silently with almost no force required, the spring mechanism inside the catch has failed and replacement is needed.
The plastic housing breaks under repeated impact — especially if the door has ever been slammed hard. A cracked catch body cannot hold the strike pin securely regardless of spring condition.
💡 Pro Tip: How to Know Your Door Catch Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer door will not stay shut — pops open during or after loading
⚠️ Dryer fails to start even when the door appears closed
⚠️ Visible cracks, deformation, or missing tabs on the plastic catch body
⚠️ Door closes but offers almost no resistance — catch feels loose or hollow
🔍 Technician Tip: Before ordering, also inspect the door springs (WP3387565) — if the springs are dislodged the door will continue to pop open even after replacing the catch. Remove the toe plate and verify the springs are properly seated before completing the repair.
📦 What's in the Box
✅ 1× Dryer Door Catch W10111905 (female latch assembly, spring-loaded)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.