






The compressor fails to start because the start relay cannot provide the initial current boost needed. Replacing the relay restores the compressor startup sequence and normal cooling.
A failed relay causes the compressor to attempt a start, click off, and retry every few minutes. A new relay and overload unit eliminates this restart loop.
When the overload protector fails open, the compressor cannot complete a run cycle, resulting in rising cabinet temperature. Replacing this part restores full cooling capacity.
A worn overload protector may trip prematurely due to heat fatigue, cutting the compressor off before the refrigerator reaches set temperature. A new overload restores correct thermal trip thresholds.





💡 Pro Tip: Diagnosing a Bad Compressor Relay & Overload
Your part is likely the culprit if you notice any of the following:
⚠️ Refrigerator is not cooling but the interior light still works
⚠️ You hear a click or brief hum every few minutes but the compressor never starts
⚠️ Shake the old relay — a rattling sound inside confirms an internal failure
⚠️ Freezer is warm and food is spoiling faster than normal
🔍 Quick field test: Unplug the relay from the compressor and shake it near your ear. If you hear loose pieces rattling inside, the relay is confirmed bad and this part will restore normal operation. If the compressor vibrates slightly but won't start, also check the run capacitor (W10662129) as a secondary suspect.
📦 What's in the Box
✅ 1× Compressor Start Relay & Overload Assembly (61005518 / ER61005518)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.