Repair Guide Beginner

How to Replace WB03K10303 Surface Burner Control Knob on GE Gas Ranges — Step-by-Step

4 min read
May 22, 2026
Repair time
2-5 minutes
Difficulty
Beginner
Part cost
$32.99
Tools needed
1
1Tools you'll need
none
2Disconnect power

Ensure all burners are off and the range is cool before removing knobs. Do not force knobs onto stems — misalignment can damage the valve.

3Step-by-step
WB03K10303 WB03K10303 Surface Burner Control Knob Compatible with GE Hotpoint RCA, Replaces AP4980246 WB03K10208 PS3486484 AH3486484

You're standing at your GE range, and the burner control knob just spins without catching — or worse, it's cracked and you can't turn the burner on at all. The WB03K10303 surface burner control knob is one of the most frequently replaced parts on GE, Hotpoint, and RCA gas ranges, and honestly? It's also one of the easiest fixes you'll ever do. No tools required, no disconnecting gas lines, just a straight pull-and-push replacement.

This knob fits dozens of GE models including the JGB918SEL1SS, JGB916SEL2SS, JGB908SEL4SS, and PGB910SEM series. It replaces older part numbers AP4980246, WB03K10208, and PS3486484, so if you've got any of those listed, you're in the right place.

What You Need Before Starting

  • Tools: None — this is a hand-pull replacement
  • Repair Time: 2-5 minutes
  • Difficulty: Beginner (easiest appliance repair you'll do)
  • Parts: WB03K10303 replacement knob

The only challenge here is making sure you've got the right knob. GE uses different stem shapes across model lines, so double-check your model number against the compatibility list. Some folks have reported fitment issues when ordering for non-listed models, so verification matters.

Safety First

Turn off all burners and let the range cool completely before starting. While you don't need to disconnect power or gas for this repair, you don't want to accidentally turn a burner on while pulling the knob off. If you smell gas at any point, stop immediately and call a professional — though this repair doesn't involve gas connections, it's worth mentioning.

Step 1: Remove the Old Control Knob

Grip the old knob firmly and pull straight out away from the control panel. Don't twist it — just pull. It's held on by friction against a D-shaped metal stem. If it's stuck from years of grease buildup, wiggle it gently side to side while pulling. The knob should slide right off, exposing the valve stem underneath.

Step 2: Clean the Valve Stem

Before installing the new knob, wipe down the exposed valve stem with a damp cloth. Remove any grease, food residue, or gunk that's accumulated. This ensures the new knob will seat properly and grip firmly. Check the stem shape — it should be a flattened D-shape. If the metal stem itself is damaged or rounded off, you've got a bigger problem that requires a valve replacement.

Step 3: Align and Install the New WB03K10303 Knob

Look inside the back of your new knob — you'll see a D-shaped hole that matches the stem. Line up the flat side of the stem with the flat side of the knob opening. Push the knob straight onto the stem until it's flush against the control panel. You should feel it seat firmly with no wobble. If it doesn't push on easily, don't force it — remove it and check the alignment again.

Step 4: Test the Control Operation

Turn the knob from the off position through all settings (low, medium, high) and back to off. It should move smoothly with distinct clicks at each position. Turn on the burner briefly to verify the knob engages the valve properly and the flame ignites. If the knob spins freely without resistance, it's not seated correctly on the stem — pull it off and reinstall.

Verifying Proper Fit

Here's the thing that trips people up: not all GE knobs are universal. The WB03K10303 specifically fits the models listed in the compatibility chart. If you've ordered this knob and it doesn't fit your range, check your model number against the list. GE made several different knob styles over the years, and the stem shapes vary. The good news? If it doesn't fit, this is one of the easiest parts to return since it's never exposed to water, gas, or electrical current.

Frequently Asked Questions

Will this knob fit my GE range if my model number isn't listed?

Probably not. GE used different stem configurations across model lines, and forcing the wrong knob onto a different stem will either damage the knob or leave it loose and non-functional. Cross-reference your full model number (usually on a tag inside the oven door or drawer) with the compatibility list before ordering. If your model isn't listed, search by your specific model number instead of assuming compatibility.

Why does my new knob feel loose even though it's the right part?

If the knob wobbles or doesn't stay in position, the valve stem itself may be worn down. Over time, the metal stem can lose its shape from repeated use. Try pushing the knob on firmly one more time — sometimes it takes more force than expected to fully seat it. If it's still loose, you may need to replace the entire valve assembly, which is a more involved repair requiring access to the back of the control panel.

Can I use this knob on a Hotpoint or RCA range?

Yes — Hotpoint and RCA ranges made during the same era as compatible GE models use the same valve stems and control knobs. GE owns both brands, so parts often cross over. Just verify your model number is in the compatibility list. The WB03K10303 specifically works with certain Hotpoint and RCA gas ranges, but again, stem shape matters more than brand name.

Clean the valve stem before installing the new knob to ensure a firm, wobble-free fit.

Need the part for this repair?

WB03K10303 · In Stock · Ships next business day

Shop WB03K10303 →
Parts for this repair
WB03K10303
WB03K10303 Surface Burner Control Knob Compatible with GE Hotpoint RCA, Replaces AP4980246 WB03K10208 PS3486484 AH3486484
$32.99
Add to Cart