




Dryer produces loud squealing, thumping, or rumbling sounds during operation caused by worn, flat-spotted, or broken drum support rollers failing to rotate freely.
The dryer drum stops turning or spins very slowly because seized or collapsed rollers create excessive drag that stalls rotation.
Motor runs and heat activates but the drum does not move — heavily worn rollers can lock the drum in place and prevent tumbling entirely.
Worn rollers cause the drum to wobble or sag, reducing proper tumbling action and airflow — leading to significantly longer drying times and damp laundry.
Flat-spotted or cracked roller wheels cause the drum to bounce unevenly during rotation, producing cabinet vibration and walking on hard floors.




💡 Pro Tip: Is Your LG Dryer Drum Roller the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Loud squealing, thumping, or rumbling noise during any part of the drying cycle
⚠️ Drum spins slowly, stops mid-cycle, or won't turn at all
⚠️ Dryer runs but clothes remain damp — drum wobble reduces tumbling efficiency
⚠️ Visible flat spots, cracks, or worn rubber on the existing roller wheels
📝 Diagnostic tip: Open the dryer door and manually rotate the drum. If you feel rough spots, hear grinding, or the drum droops at the front, the rollers are worn. LG dryers use 4 rollers total — 2 front, 2 rear. Always replace all four at the same time to prevent uneven wear and a repeat repair call.
📦 What's in the Box
✅ 1× Dryer Drum Support Roller & Axle Assembly — 4581EL2002C (roller wheel + steel shaft + tri-ring retaining clip)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.