





The door bin has cracked along the sides or base, causing items to fall out or the bin to lose structural integrity. Replace immediately to prevent spills and restore safe storage.
The door bin repeatedly pops out of the door grooves when opening the refrigerator, especially when loaded with bottles or heavy condiments. A new bin with intact locking tabs snaps securely into place.
Prolonged exposure to very cold temperatures or overstocking causes the plastic to warp, leaving the shelf floor uneven and items prone to tipping. Replace with a fresh bin to restore level storage.
One or more door bin positions are empty due to a lost or previously broken shelf, reducing usable door storage. This direct-fit replacement restores full-capacity organisation on the lower refrigerator door.




💡 Pro Tip: How to Know Your Door Bin Needs Replacing
Your part is likely the culprit if you notice any of the following:
⚠️ The door bin has cracked, split, or broken along the sides or base
⚠️ The bin falls off the door when you open or close it, especially under load
⚠️ Items stored in the bin tilt, slide, or tip due to a warped or damaged shelf floor
⚠️ The bin no longer clicks securely into the door channel grooves
🔍 Tip: Very low refrigerator temperatures and overstocking are the two most common causes of door bin cracking. If your fridge runs below 34°F, check and adjust your temperature setting before installing the new bin to extend its service life.
📦 What's in the Box
✅ 1× Refrigerator Bottom Door Bin — White (approx. 18" × 5.5" × 3.5"), compatible with 240323001 specification
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.