Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Cracked or fouled igniter cannot produce a bridging spark to ignite gas
Electrode receives voltage but ceramic failure prevents spark from jumping to burner cap
Corroded bracket shifted tip out of alignment with burner cap — spark fires into open air
💡 Pro Tip: Check the Tip Gap Before Closing Up
Your part is likely the culprit if you notice any of the following:
⚠️ One specific burner clicks but produces no visible spark
⚠️ Burner lights unreliably — sometimes on first click, sometimes after 10
⚠️ Spark fires but misses the burner cap — tip misaligned from corroded bracket
⚠️ Ceramic body cracked, chipped, or discolored black around the tip
After installing, look at the gap between the electrode tip and the burner cap position — it should be roughly 3-4mm. Aftermarket igniters sometimes ship with the tip slightly off-angle. Use needle-nose pliers to gently adjust the metal tip only — never apply force to the ceramic insulator or it will crack.
📦 What's in the Box
✅ 1x 74004053 Spark Igniter Electrode
✅ 1x Mounting Bracket
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.