




Cracked blades cannot mince debris — food residue left on dishes after full wash
Chipped blades strike pump housing creating grinding during wash
Large debris jams impeller when chopper fails
Seized chopper locks pump shaft — machine hums but cycle cannot initiate





💡 Pro Tip: Is Your Dishwasher Chopper the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Standing water remains at the bottom after every cycle
⚠️ Dishes have food particles still stuck on after a full wash
⚠️ Loud grinding or rattling noise during the wash cycle
⚠️ Dishwasher pump hums but water will not drain
Remove the pump cover and visually inspect the blades. A cracked, chipped, or missing blade segment is a dead giveaway. You can also check motor continuity with a multimeter — if the motor is fine but the machine still grinds, the chopper is your answer.
📦 What's in the Box
✅ 1x W10083957V 4-Blade Chopper Blade Assembly (with hub)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.