









Refrigerator stops producing ice entirely. The ice maker assembly fails to cycle, trigger the water fill, or eject cubes — even when water supply is confirmed functional.
Water drips from the ice maker area, overflows the tray, or freezes on the freezer walls. Often caused by a worn ice mold seal or failed internal heater preventing proper ice release.
Ice forms in the mold but the ejector bar fails to push cubes into the ice bucket, leaving the tray perpetually full and halting production.
Ice maker runs but produces fewer cubes per cycle than expected, or cubes are undersized due to insufficient water fill caused by a worn or miscalibrated ice mold assembly.
The ice maker emits grinding, clicking, or mechanical noises during the cycle — often indicating a failed motor gear or worn ejector mechanism inside the modular assembly.





💡 Pro Tip: How to Know Your Ice Maker Needs Replacing
Your part is likely the culprit if you notice any of the following:
⚠️ Refrigerator stopped making ice entirely despite water supply being confirmed OK
⚠️ Ice maker produces irregular, misshapen, or undersized ice cubes
⚠️ Water leaks or overflows from the ice maker tray area
⚠️ Grinding or unusual noises during the ice-making cycle
🛠 Before replacing, verify the water inlet valve is delivering adequate pressure (use a multimeter to test for voltage at the valve during the ice maker's fill cycle). If water supply checks out and manually filling the tray still produces ice, the ice maker module itself is the culprit. Ice makers typically need replacement every 3–10 years depending on usage and water quality.
📦 What's in the Box
✅ 1× 8-Cube Ice Maker Assembly (115V / 60Hz / 1.6W, 11-1/4"L × 4-5/8"W × 4-3/4"H)
✅ 1× Round 4-pin wire harness (~12" long)
✅ 1× Flat rectangular 4-pin wire harness (~10-7/8" long)
✅ Mounting hardware (screws & clips)
✅ Installation instructions
⚠️ Shut-off/bail arm NOT included — transfer from original unit or order separately (top-freezer: #627792; side-by-side: #627913)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.