Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
One or more wires on the beater have snapped at the weld joint — a common failure from mixing thick dough or heavy batter. Replace both beaters as a matched pair to ensure balanced mixing.
Beater blades are visibly bent or out-of-round, causing the blades to strike each other during operation or create excessive vibration and noise.
The beater stems are worn or damaged and no longer click securely into the mixer socket, causing them to wobble or fall out during use.
One or both original beaters have been lost. This 2-pack replaces the complete set so the mixer can be used immediately.
💡 Pro Tip: When to Replace Your Hand Mixer Beaters
Your part is likely the culprit if you notice any of the following:
⚠️ One or both beater wires are bent, snapped, or separated at the weld point
⚠️ Beaters wobble, rattle, or spin unevenly during mixing
⚠️ Beaters will not lock securely into the mixer head sockets
⚠️ Mixer makes unusual noise or vibrates excessively due to deformed beater shape
🔎 Before ordering, confirm your mixer model starts with KHM (e.g. KHM3, KHM5, KHM7, KHM9 series). Check the label on the bottom of the mixer body. If the label is worn, count the speed settings — 3, 5, 7, or 9-speed KitchenAid hand mixers all use this beater set.
📦 What's in the Box
✅ 2× Stainless Steel Hand Mixer Turbo Beaters (Left + Right, approx. 1-1/2" W × 7" D each)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.