Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Oven turns on but produces no heat during bake mode. The bake element at the bottom of the oven has burned out and is no longer generating heat.
Oven heats unevenly or requires a much higher temperature setting to achieve proper cooking results. Only the broil element is heating, causing hot spots and uneven baking.
Oven takes an excessively long time to reach the set temperature because the bake element is partially failed and not contributing to the heating cycle.
The bake element shows visible holes, blisters, cracks, or burn marks along its surface, indicating it has burned out and must be replaced.
Oven reaches temperature but cannot maintain it during baking, resulting in undercooked food. A degraded bake element fails to cycle on properly to sustain oven temperature.
💡 Pro Tip: Is Your Bake Element the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Oven runs but produces little or no heat during bake cycles
⚠️ You must set temperature 100°F+ higher than desired to get proper results
⚠️ Only the broil element glows during preheat — bake element stays dark
⚠️ Visible holes, blisters, or burn marks on the element surface
🔍 Diagnosis Tip: Turn the oven on to bake and watch through the window — the bake element at the bottom should glow red hot within a few minutes. If it stays dark or shows physical damage, test it with a multimeter for continuity. An open circuit (no continuity) confirms the element has failed and needs replacement. Also verify the oven temperature sensor (thermistor) reads approximately 1100 ohms at room temperature before replacing the element, to rule out a sensor fault.
📦 What's in the Box
✅ 1× Oven Bake Element DG47-00038B (240V / 2400W, 19-1/2" x 20-7/8", 0.250" push-in terminals)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.