GE Dishwasher Lower Rack Wheel Parts — Models & Compatibility

Your GE dishwasher's lower rack shouldn't sound like it's grinding gravel every time you pull it out. When those small gray wheels crack or wear down, you'll hear it — and eventually, your rack won't roll smoothly at all. This replacement wheel kit (WD35X21038) fits over 100 GE, Hotpoint, and Kenmore dishwasher models, solving both noise issues and stuck racks that won't glide properly.

Is This the Right Part for Your Model?

This wheel kit is compatible with GE dishwashers manufactured from the early 2000s through 2015, including the GSD, GSC, and HDA series. You'll find your model number on a label inside the door frame or along the top edge of the tub when you open the door. Common models include GSD2100V35WW, GSD3300D45BB, GSD3340D50SA, GSD4000D35WW, and Hotpoint HDA2000V35WW — but check the full compatibility list below to confirm your exact model.

About This Replacement Part

The WD35X21038 is a complete lower rack wheel kit that includes multiple wheels to refresh your dishwasher's bottom rack rolling system. These wheels handle the full weight of your loaded dishes every cycle, so they wear down over time — especially if you're loading heavy pots and pans regularly. When they fail, you'll notice three telltale symptoms: the dishwasher becomes noticeably noisy during operation, the rack won't slide smoothly (or gets stuck entirely), and in severe cases, the misaligned rack can prevent the door from closing properly. This kit replaces older part numbers including AP5986365, WD12X10267, WD12X10074, and PS11726733, so if you've got any of those numbers written down from a previous repair, this is your updated replacement.

Why These Wheels Wear Out

Dishwasher rack wheels aren't designed to last forever. They're typically made from a hard plastic that gets brittle with age and exposure to hot water and detergent chemicals. Over years of use, the wheel surfaces flatten out or develop cracks, and the axle holes widen. Once that happens, the wheels don't spin freely anymore — they drag, wobble, or simply fall off the rack assembly. If you've been ignoring the grinding noise for a while, you might also find wear marks on the tub bottom where the metal rack has been scraping.

Compatible GE Dishwasher Models

This wheel kit works with the following GE and Hotpoint dishwasher models. If your model isn't listed here, use the full compatibility checker on the product page:

• GSD2100V35WW
• GSD3300D45BB
• GSD3340D50SA
• GSD3340D35SA
• GSD4000D35WW
• GSC3500D35WW
• GSC3500D35BB
• GSD5114D02AA
• GSD5110D00AA
• GSD2130C07WW
• GSD5900G03BB
• GSD3400G00WW
• GSD1900J01WH
• GSD1910T60AA
• GSD2000F00WH
• GSD2000G00AA
• HDA2000V35WW (Hotpoint)
• HDA1000G00WH (Hotpoint)

What's Included

The WD35X21038 kit includes multiple replacement wheels designed to refresh your entire lower rack rolling system. You're not just replacing one failed wheel — you're upgrading all the high-wear contact points so your rack glides like it did when the dishwasher was new. Each wheel snaps onto the rack assembly without tools, though you'll need to pull the lower rack completely out of the dishwasher to access the wheel mounting points.

Installation Overview

Replacing these wheels is straightforward: pull the lower rack all the way out until it stops, lift the front edge up slightly, and pull it completely free from the rails. Flip the rack over and you'll see the old wheels mounted on metal brackets along each side. Pop the worn wheels off (some may already be loose or missing), then press the new wheels firmly onto the mounting posts until they click into place. Reinstall the rack by reversing the removal process — slide the back edge onto the rails first, then lower the front edge and push it in.

Order Your Replacement Wheel Kit

The WD35X21038 wheel kit is priced at $27.99 and ships ready to install. It's a direct replacement for AP5986365, WD12X10267, WD12X10074, and PS11726733, so if you've been searching for any of those part numbers, this is the current superseding part. Check the compatibility list on the product page to verify fitment for your specific model, then get your dishwasher rack rolling smoothly again.