Samsung Refrigerator Ice Maker Fill Tube & Heater Assembly Parts — Models & Compatibility

If your Samsung French door refrigerator's ice maker suddenly stopped working or you're finding frost buildup inside the ice maker compartment, the fill tube and heater assembly (DA97-00209Z) is likely the culprit. This critical component delivers water to your ice maker while preventing freeze-ups — when it fails, you'll get no ice or malformed cubes. It's one of the most common ice maker repairs across Samsung's RF260 through RF263 series refrigerators.
Is This the Right Part for Your Model?
The DA97-00209Z fits Samsung French door refrigerators with bottom-mount freezers, specifically the RF260 and RF261 series (26 cubic foot models) and RF263 series (25.5 cubic foot models). Your model number is on a sticker inside the refrigerator compartment, typically on the left wall near the top or on the ceiling. It'll start with RF26 — check the full number against our compatibility list below to confirm this part works for your specific refrigerator.
About This Replacement Part
The ice maker fill tube and heater assembly is the pathway that carries water from your refrigerator's water line into the ice maker mold. The integrated heater prevents the tube from freezing during fill cycles — a design flaw in these Samsung models makes this heater prone to failure after 3-5 years. When it goes bad, water either can't reach the ice maker (no ice production) or partially freezes in the tube (slow ice production with hollow or misshapen cubes). This is a direct OEM replacement for Samsung part numbers AP5577572 and PS4169184, so you're getting the exact same component that came with your refrigerator. The assembly includes both the fill tube and heating element as one integrated unit, which simplifies installation — you don't need to splice wires or make separate connections.
Compatible Samsung Refrigerator Models
This ice maker fill tube assembly works with the following Samsung refrigerator models. If your model isn't listed but starts with RF260, RF261, RF262, or RF263, it's likely compatible — contact us to verify.
- RF260BEAESR — 26 cu. ft. French Door (Stainless)
- RF260BEAEWW — 26 cu. ft. French Door (White)
- RF260BEAEBC — 26 cu. ft. French Door (Black)
- RF260BEAESG — 26 cu. ft. French Door (Stainless Look)
- RF260BEAESP — 26 cu. ft. French Door (Platinum)
- RF261BEAESR — 26 cu. ft. French Door (Stainless)
- RF261BEAEWW — 26 cu. ft. French Door (White)
- RF261BEAEBC — 26 cu. ft. French Door (Black)
- RF261BEAESG — 26 cu. ft. French Door (Stainless Look)
- RF261BEAESP — 26 cu. ft. French Door (Platinum)
- RF262BEAESR — 26 cu. ft. French Door (Stainless)
- RF263TEAESR — 25.5 cu. ft. French Door (Stainless)
- RF263TEAEWW — 25.5 cu. ft. French Door (White)
- RF263TEAEBC — 25.5 cu. ft. French Door (Black)
- RF263TEAESG — 25.5 cu. ft. French Door (Stainless Look)
All models listed use the same fill tube assembly design. Color variations (stainless, white, black, platinum) don't affect part compatibility — the internal ice maker components are identical across the series.
Installation Overview
Replacing this part requires removing the ice maker assembly from the freezer compartment. You'll need to disconnect the wiring harness, remove the mounting screws, and swap the old fill tube for the new one. The entire job takes about 30-45 minutes if you're comfortable working inside your freezer. Make sure to shut off the water supply to your refrigerator before starting — there's a valve behind the fridge or under your sink that controls water flow to the ice maker.
Order Your Replacement Part
The DA97-00209Z ice maker fill tube and heater assembly is in stock at $89.99 with fast shipping. It's backed by our quality guarantee and fits all Samsung RF260, RF261, RF262, and RF263 series refrigerators. Order today and get your ice maker working again by this weekend.
Can't find your model?
Enter your model number and we'll confirm the right part.