Comparison

OEM vs Aftermarket High Limit Thermostat for Samsung/Kenmore Dryers: Honest Comparison (DC47-00018A)

4 min read
May 22, 2026
OEM Samsung price
$80–$120
Heima Aftermarket price
$39.99
Side-by-side comparison
DC47-00018A DC47-00018A High Limit Thermostat Compatible with Samsung Kenmore, Replaces AP4201898 PS4205217 35001092

You're staring at a dryer that won't heat, and after pulling the drum apart, you've confirmed the high-limit thermostat is dead. Now you're stuck between a $39.99 aftermarket DC47-00018A and an OEM Samsung part that runs $80–$120. That's a massive price gap for a component that's literally just two wires and a temperature sensor.

Let's break down what you're actually getting with each option.

Quick Answer

For most home repairs, the aftermarket DC47-00018A delivers identical performance at half the cost. The OEM version offers peace of mind if you're repair-averse, but you're paying $40–$80 extra for Samsung branding on a part that does the exact same job. Unless you're repairing a dryer under warranty, go aftermarket.

Side-by-Side Comparison

FactorOEM SamsungHeima Aftermarket
Price$80–$120$39.99
Warranty90 days (typical)1 year
Lead Time3–7 days (authorized dealers)Ships same day
Trip Temperature280°F cutoff280°F cutoff (identical spec)
Terminal ConfigurationStandard 2-wire spadeStandard 2-wire spade
ManufacturingSamsung-contracted factoryISO-certified facility

When OEM Makes Sense

There are exactly three scenarios where dropping $80+ on the Samsung-branded part is justified:

Your dryer is still under warranty. If you've got coverage, using aftermarket parts will void it instantly. Samsung's warranty explicitly requires OEM components, and their service techs check.

You're running a commercial laundromat. When downtime costs you $200/hour in lost revenue, paying extra for next-day delivery from an authorized servicer makes financial sense. You're buying speed and vendor accountability, not quality.

You're flipping the appliance for resale. Some buyers get hung up on "all original parts" even though it's functionally meaningless. If you're selling a refurbished Samsung dryer for top dollar, the OEM sticker might justify a higher asking price.

Notice what's not on this list? Reliability. The high-limit thermostat is a bi-metal disc that trips at 280°F—there's no proprietary Samsung magic happening inside that metal housing.

When Aftermarket Wins

For the DV203AEW, DV219AEW, DV316BEC, and 40+ other compatible models, the aftermarket DC47-00018A is the smarter play. Here's why:

You're paying for the part, not the logo. The $39.99 price reflects manufacturing cost plus reasonable markup. The OEM price includes Samsung's brand premium, authorized dealer overhead, and multi-layer distribution markup. You're literally paying $50 extra for a white label.

The failure mode is identical. High-limit thermostats fail when dryers overheat—usually because the exhaust vent is clogged or the blower wheel is packed with lint. This causes the dryer to cut off power and stop heating completely. Whether it's OEM or aftermarket, the thermostat does its job and dies protecting your dryer from fire. Replace the part, clean your vent, move on.

Longer warranty coverage. Heima backs the aftermarket version for a full year versus Samsung's typical 90-day parts warranty. If you're worried about premature failure, you're actually better protected with the cheaper option.

Faster shipping. The Heima part ships same-day. Samsung OEM parts route through authorized service networks with 3–7 day lead times unless you're willing to drive to a parts depot. When your family's buried in wet laundry, three days feels like forever.

The Real Question Nobody Asks

Why did your high-limit thermostat fail in the first place? If you just swap the part without addressing the root cause, you'll be back here in six months—OEM or aftermarket won't matter.

Pull your dryer away from the wall and check the exhaust vent. If it's kinked, crushed, or packed with lint, your new thermostat will overheat and trip again. Clean the vent, check the blower wheel for lint buildup, and make sure the vent hood outside isn't blocked. Then replace the thermostat.

Our Verdict

Save the $50 and buy the aftermarket DC47-00018A unless you're under warranty or running a commercial operation. The part's identical where it matters—same trip temperature, same terminal configuration, same mounting holes. Use the money you save on a proper dryer vent cleaning kit, because that's what actually prevents future thermostat failures.

Frequently Asked Questions

Will the aftermarket thermostat fit my Kenmore dryer?

Yes. Kenmore-branded dryers in the 110-series are manufactured by Samsung and use the identical DC47-00018A thermostat. The aftermarket version replaces AP4201898 and PS4205217, which are the same part sold under different supplier numbers. Check your model number against the compatibility list, but if your existing thermostat looks identical, you're good to go.

How do I know if the thermostat is actually bad?

Unplug the dryer, pull the old thermostat, and test it with a multimeter set to continuity. At room temperature, you should get a reading (closed circuit). If it shows infinite resistance, it's blown and needs replacement. Don't skip this step—replacing a good thermostat because you didn't test it wastes time and money.

Can I just bypass the thermostat to test the dryer?

Absolutely not. The high-limit thermostat is a safety device that prevents fires when your dryer overheats. Bypassing it turns your dryer into a potential house fire waiting to happen. If you're testing, jumper the wires for 30 seconds max with the dryer running, then immediately reconnect or replace the thermostat. Never run it bypassed permanently.

Ready to go aftermarket?

DC47-00018A · Factory direct · 1-year warranty

Shop DC47-00018A →