Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer fills with water but drum refuses to agitate or spin because the control board cannot confirm the door is locked.
Control panel displays a dL or dE door lock fault code, stopping the cycle before it begins.
Washer abruptly pauses mid-cycle and unlocks the door due to a failed lock switch losing contact.
Lid or door feels loose and does not click into the locked position when a cycle is started.
💡 Pro Tip: How to Know Your Door Lock Switch Is the Problem
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills with water but the drum won't start agitating or spinning
⚠️ Door feels unlocked or loose even after the cycle starts
⚠️ Control panel displays a door lock error code (dL, dE, or similar)
⚠️ Washer stops mid-cycle and door unlocks unexpectedly
🔍 Diagnostic Tip: Unplug the washer, remove the top panel to access the door lock assembly, and test the lock solenoid terminals with a multimeter for continuity. No continuity = failed lock — replace with DC34-00025B. Always unplug before testing.
📦 What's in the Box
✅ 1× DC34-00025B Door Lock Switch Assembly (DC 12V, motor-driven)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.