Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer stops mid-cycle and displays OE error — the drain pump motor has failed to evacuate water within the allotted time. Replacing the pump motor restores full drainage and clears the error code.
A worn or seized impeller produces grinding, rattling, or loud humming during the drain and spin phases. A new pump motor eliminates the noise and restores quiet operation.
A cracked pump housing or failed shaft seal causes water to drip from the lower front access panel area. Replacing the pump assembly stops the leak and prevents floor damage.
Insufficient pump pressure means water is not fully expelled before the spin cycle, leaving clothes soaking wet. A new pump motor delivers full 26V BLDC power for complete water removal.
The control board detects a drain failure and halts the cycle before or during spin. Replacing the defective drain pump allows the cycle to complete normally.
💡 Pro Tip: How to Diagnose a Faulty LG Drain Pump
Your part is likely the culprit if you notice any of the following:
⚠️ Washer displays OE error code — drain cycle timeout indicates pump is not moving water
⚠️ Loud grinding, humming, or rattling noise during the drain or spin portion of the cycle
⚠️ Water remains standing in the drum after the cycle ends — no or slow drainage
⚠️ Clothes come out excessively wet or the washer will not advance past the spin cycle
⚠️ Visible water leaking from the lower front access panel area near the pump filter
🛠 Before replacing, first remove and clean the pump filter trap — debris buildup causes ~40% of OE codes. If the filter is clear, spin the impeller by hand through the filter port: a seized or stiff impeller confirms a failed pump motor and replacement is required.
📦 What's in the Box
✅ 1× Drain Pump Motor Assembly EAU64082902 / WDD0015X1M (BLDC 26V DC, with integrated wiring connector)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.