



The handle support bracket anchors each end of the door handle to the door panel. When the bracket cracks or breaks, the handle shifts or wobbles during use.
A fully broken support allows the handle to pull away from the door entirely, making the microwave impossible to open safely.
A damaged bracket causes the handle to bind or flex unevenly, making it hard to pull the door open with consistent force.
The white plastic bracket is the first point of failure under repeated stress. Visible cracks or chips at the handle ends indicate the support needs immediate replacement.




💡 Pro Tip: How to Tell If Your Handle Support Is the Problem
Your part is likely the culprit if you notice any of the following:
⚠️ The door handle feels loose, wobbly, or shifts sideways when pulled
⚠️ The handle has visibly separated or partially detached from the door panel
⚠️ You can see cracks, chips, or fractures on the white plastic bracket at either end of the handle
⚠️ The microwave door is difficult to open or doesn't latch properly due to handle movement
🔍 Diagnosis Tip: Open the microwave door fully and grip the handle at both ends individually. If either end flexes more than 1–2 mm or you hear a creak/click, the support bracket on that side is cracked internally and needs replacement. Remember: there are TWO supports per handle — always inspect and replace both at the same time to prevent uneven stress on the new bracket.
📦 What's in the Box
✅ 1× WB06X10943 Microwave Door Handle Support (White, ABS plastic) — Note: 2 units required per handle; sold individually
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.