Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Oven displays an error (e.g., E012) when the meat probe is plugged in, indicating a failed thermistor or broken cable.
The probe reports wildly incorrect internal meat temperatures, causing overcooked or undercooked results.
Oven fails to enter or complete the automatic cook-to-temperature program when the probe is connected.
Oven display shows no temperature value after inserting the probe into meat and plugging into the oven jack.
💡 Pro Tip: Is Your Meat Probe the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Oven displays an error code (e.g., E012 or F7) when the probe is plugged in
⚠️ Probe temperature reading is wildly inaccurate or jumps erratically on the display
⚠️ Oven stops the auto meat-probe cooking cycle prematurely or never triggers it
⚠️ Visible damage — cracked silicone cable, bent probe tip, or broken connector plug
🔍 Quick test: Unplug the probe and measure resistance across the connector pins with a multimeter at room temperature (~68°F / 20°C). A healthy NTC thermistor typically reads approximately 10kΩ. A reading of 0Ω (short) or OL (open) confirms the probe is defective and needs replacement.
📦 What's in the Box
✅ 1× Meat Probe Thermometer (Stainless Steel 304 probe + Food-Grade Silicone Cable + Connector Plug)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.