Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The strike is broken, chipped, or the metal tip has snapped off, preventing the door latch from catching and holding the door closed.
The door switch cannot detect a closed door because the strike no longer engages the actuator, causing the control board to block cycle start.
A worn or misaligned strike loses contact with the door switch during agitation vibration, triggering a mid-cycle door-open fault.
Control board displays a door lock or door open error code because the faulty strike fails to fully depress the door lock switch plunger.
The plastic bumper portion of the assembly is cracked or missing, causing the door to rattle and sit unevenly against the cabinet seal.
💡 Pro Tip: Is Your Door Strike the Culprit?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer door won't latch or stay closed after pushing shut
⚠️ Washer won't start or stops mid-cycle with a door-lock error code
⚠️ Visible crack, chip, or the metal tip of the strike has broken off
⚠️ Door feels loose or rattles even when appearing closed
🔍 Quick test: With the washer unplugged, manually press the door strike into the latch receiver on the cabinet. If there is no firm click or the strike slides freely, it is worn or misaligned and must be replaced before the washer can sense a secure door closure and allow a cycle to run.
📦 What's in the Box
✅ 1× Complete Door Strike Assembly 134937300 (metal strike plate + ABS plastic bumper, approx. 0.09 lbs)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.