GE Refrigerator PTC Start Relay & Overload Parts — Models & Compatibility

Your GE refrigerator won't start. The compressor clicks but never runs, or worse — it's completely silent. That's usually a failed PTC start relay and overload assembly, and this hub covers the WR07X10097 replacement that works across dozens of GE and Hotpoint refrigerator models, particularly in the PFS series.

Is This the Right Part for Your Model?

The WR07X10097 fits a wide range of GE side-by-side and bottom-freezer models. Your model number is typically located inside the fresh food compartment on the upper left sidewall, or sometimes on the right side near the door hinge. It'll be a combination of letters and numbers like PFS22MBSABB or PSS25SGMCSS. Cross-reference your full model number with our compatibility list below — if it matches, you've got the right part.

About This Replacement Part

The PTC (Positive Temperature Coefficient) start relay and overload assembly is what kicks your compressor into action. When this component fails, you'll experience a "Will Not Start" condition — the most common symptom with this part. The compressor might click repeatedly as it tries to start but can't overcome the initial resistance without a functioning relay. This assembly combines both the start relay and thermal overload protection in one unit, mounted directly on the compressor terminals at the back of your refrigerator. The WR07X10097 replaces several older part numbers including AP4300623, PS1766101, 1265640, and 513604045, making it a universal solution for multiple GE refrigerator generations. At $96.99, it's significantly cheaper than a service call, and replacing it yourself takes about 15 minutes once you pull the fridge away from the wall.

Compatible GE Refrigerator Models

This relay assembly works with numerous GE and Hotpoint refrigerator models. Below are the most common series and models that use the WR07X10097:

• PFS Series: PFS22MBSABB, PFS22MBSAWW, PFS22MBSBBB, PFS22MBSBWW, PFS22MBWABB, PFS22MBWAWW, PFS22MBWBBB, PFS22MBWBWW, PFS22MISABB, PFS22MISAWW, PFS22MISBBB, PFS22MISBWW, PFS22SBSASS, PFS22SBSBSS, PFS22SBSCSS, PFS22SISASS, PFS22SISBSS, PFS22SISCSS
• PSS Series: Numerous PSS models in 23, 25, and 26 cubic foot configurations
• Additional Models: Compatible with select Hotpoint and other GE refrigerator lines manufactured between 2005-2015

Always verify your exact model number before ordering. The complete compatibility list includes over 100 specific model variations.

Why This Part Fails

Start relays fail from repeated thermal cycling and electrical stress. Every time your compressor starts, the relay heats up and cools down. After thousands of cycles over several years, the internal contacts degrade or the PTC element loses its switching characteristics. Power surges and voltage fluctuations accelerate this wear. If you've had recent electrical storms or your home experiences frequent power interruptions, your relay might fail prematurely. Most start relay assemblies last 8-12 years under normal conditions, but once they fail, replacement is the only fix — these aren't serviceable components.

Order Your Replacement Part

The WR07X10097 PTC Start Relay & Overload Assembly is available for $96.99 with fast shipping. This is a genuine replacement part that meets OEM specifications for all compatible GE and Hotpoint models. Order now to get your refrigerator running again.