Whirlpool, Maytag & Amana Dryer Drum Drive Belt Parts — Models & Compatibility

Your dryer's tumbling but making no heat? Or worse—it won't spin at all? The drum drive belt is usually the culprit. This 40111201 replacement belt fits over 100 Whirlpool, Maytag, Amana, Admiral, and Speed Queen dryer models. It's the same belt that wraps around your drum and motor pulley to keep everything spinning smoothly.

Is This the Right Belt for Your Dryer Model?

Check your dryer's model number—it's typically on a sticker inside the door frame or on the back panel near the power cord. Cross-reference it with the compatibility list below. This belt replaces part numbers WP40111201, AP6009126, 14218936, and 59174, so if you've found any of those numbers in your parts manual, you're in the right place.

About This Replacement Drive Belt

The 40111201 is a heavy-duty rubber belt designed to handle the constant friction and heat cycles inside your dryer. When this belt wears out—usually after 8-10 years of regular use—you'll hear squealing noises during operation, or the drum simply won't turn even though the motor's running. Some dryers will start for a few seconds then stop completely. The belt stretches over time, developing cracks and glazed spots that prevent proper grip on the drum and pulley system.

Compatible Dryer Models

This belt works across multiple brands because Whirlpool manufactures dryers for several companies. Here are the confirmed compatible models:

Amana Dryers

• ADE7005AYW
• ADG7005AWW
• AEM407W2
• AEM427W2
• AEM477W2
• ALE443RAW
• ALE643RAW
• ALG331RAW

Maytag Dryers

• MDE208DAYW
• MDE2706AYW
• MDE308DAYW
• MDE3706AYW
• MDE3758AYW
• MDE508DAYW
• MDE5806AYW
• MDET236AYW
• MDET336AYW
• MDET446AYW

Whirlpool Dryers

This belt also fits numerous Whirlpool models in the same design family, along with Admiral and Speed Queen dryers manufactured during the same production period.

What to Expect During Replacement

Replacing a dryer belt isn't complicated, but it does require removing the dryer's front or top panel to access the drum. You'll need to lift the drum slightly to loop the new belt around it, then thread it through the idler pulley and motor pulley in the correct configuration. The belt should feel snug but not overly tight—there's an automatic tensioner (the idler pulley) that maintains proper tension once everything's reassembled.

Why This Belt Fails

Constant flexing causes the rubber to lose elasticity. Lint buildup around the drum and blower housing makes the motor work harder, putting extra stress on the belt. Overloading your dryer accelerates wear because the belt has to grip a heavier rotating mass. If you've been running large loads or your dryer's vent system is clogged, the belt pays the price.

Order Your Replacement Belt

The 40111201 belt is available for $15.99 with fast shipping. It's a direct OEM-equivalent replacement that'll get your dryer back to normal operation. Most people complete this repair in under an hour once they have the belt in hand.