Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The worn catch gear no longer engages the door strike, causing the door to spring open or refuse to latch. Replacing the latch assembly restores a firm, audible click closure.
Many LG dryers require the door latch to fully engage before the start circuit activates. A broken latch prevents the door-sense signal, so the dryer appears dead even with correct settings.
Vibration during tumbling can force a weakened latch open, interrupting the drying cycle and allowing heat to escape, reducing drying efficiency.
A latch that doesn't pull the door fully flush against the gasket creates a gap, letting heated air escape and significantly extending dry times.
💡 Pro Tip: How to Know Your Door Latch Needs Replacing
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer door pops open or swings ajar mid-cycle
⚠️ Door requires extra force to click shut, or won't latch at all
⚠️ Dryer won't start even though the door appears closed (door-sense switch not triggering)
⚠️ Warm air or heat escaping from the front door gap during operation
🔍 Quick test: Push the door firmly and listen for a solid click. If you hear no click or the door springs back open, the internal catch gear is worn and the latch assembly should be replaced. Inspect the matching door strike (4026EL3007A) at the same time — a damaged strike can cause premature latch wear.
📦 What's in the Box
✅ 1× Door Latch / Locker Assembly (compatible with OEM 4027EL1001A)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.