Samsung Washer Water Inlet Valve Parts — Models & Compatibility

Your Samsung washer won't fill with water, or worse — it's leaking all over your laundry room floor. The water inlet valve assembly controls water flow into your washer, and when it fails, you're dealing with either no water or too much of it in the wrong places. This hub covers the DC97-15459G water inlet valve assembly that fits dozens of Samsung top-load and front-load washer models.

Is This the Right Part for Your Model?

Check your washer's model number before ordering. On Samsung top-loaders, you'll find the model plate inside the washer lid or on the back panel. Front-loaders typically have it on the door frame (open the door and look along the edge). Match your full model number — including the suffix after the slash — against the compatibility list below. Models like WA456DRHDSU/AA, WA45H7200AP/A2, and WA48J7770AW/A2 all use this exact valve assembly.

About This Replacement Part

The DC97-15459G is a complete water inlet valve assembly that replaces Samsung part numbers AP5623056, PS4220861, and 3276197. This valve contains solenoids that open and close to control hot and cold water flow during wash cycles. Two primary failure modes bring people to this part: leaking from the valve body (you'll see water pooling behind or under the washer) and water filling issues where the washer either won't fill at all or fills extremely slowly. The valve solenoids can burn out over time, or the rubber seals inside degrade and start weeping water. At $111.99, it's a straightforward replacement that solves both symptom categories without requiring a service call.

Compatible Samsung Washer Models

This water inlet valve fits the following Samsung washer models. Verify your complete model number including the suffix:

• WA456DRHDSU/AA — Samsung top-load washer
• WA456DRHDWR/AA — Samsung top-load washer
• WA45H7200AP/A2 — Samsung top-load washer
• WA45H7200AW/A2 — Samsung top-load washer
• WA45K7600AW/AA — Samsung top-load washer
• WA45K7600AW/A2 — Samsung top-load washer
• WA48H7400AP/A2 — Samsung top-load washer
• WA48H7400AW/A2 — Samsung top-load washer
• WA48J7700AW/A2 — Samsung top-load washer
• WA48J7770AP/A2 — Samsung top-load washer
• WA48J7770AW/A2 — Samsung top-load washer
• WA50F9A6DSW — Samsung top-load washer
• WA456DRHDSU — Samsung top-load washer
• WA456DRHDWR — Samsung top-load washer
• WA45H7000AP — Samsung top-load washer
• WA45H7000AW — Samsung top-load washer
• WA45H7200AP — Samsung top-load washer
• WA45H7200AW — Samsung top-load washer
• WA45K7600AW — Samsung top-load washer
• WA48H7400AP — Samsung top-load washer

Common Symptoms This Part Fixes

You need this water inlet valve assembly if your Samsung washer shows these symptoms:

• Leaking: Water dripping or pooling behind the washer, especially when the machine attempts to fill
• Water Filling Issues: Washer won't fill at all, fills only with hot or cold water (not both), or takes an extremely long time to fill

What's Included

The DC97-15459G comes as a complete assembly ready to install. You're getting the valve body with both hot and cold solenoids, inlet screens, and mounting hardware. This is the exact OEM-specification part that Samsung uses in factory production.

Order Your Replacement Valve

Need this part? It's in stock at $111.99 with fast shipping. Order the DC97-15459G water inlet valve here.