Frigidaire Washer Lid Lock Switch Assembly Parts — Models & Compatibility

Your Frigidaire washer won't start, the lid lock clicks but nothing happens, or you're getting an error code pointing to the lid lock assembly. This hub covers the 134101800 lid lock switch assembly that fits dozens of Frigidaire, Electrolux, Kenmore, Gibson, and Westinghouse top-load washers. It's the small assembly that tells your washer the lid is securely closed before the spin cycle can start.

Is This the Right Part for Your Model?

The 134101800 lid lock assembly works across multiple washer series from 2008-2018. You'll find your model number on a sticker inside the washer lid or along the top frame when you open the lid — it's usually printed on a white or silver label. Cross-reference that model number with the compatibility list below before ordering.

About This Replacement Part

The lid lock switch assembly (also called part numbers AP2108159, PS648775, 131675600, 131595100, and 5303306138) is a safety mechanism that prevents the washer from spinning when the lid is open. It consists of a small motor-driven lock mechanism and an electrical switch. When the lid lock fails, your washer either won't start at all, displays a lid lock error code, or completes the wash cycle but won't spin. The most common failure point is the small plastic locking tab breaking or the internal switch contacts wearing out after thousands of cycles. This is a direct replacement part — no modifications needed.

Compatible Model Series

This lid lock assembly fits across Frigidaire's front-control and top-control washer lines, plus several rebadged models sold under Kenmore, Crosley, Gibson, and Westinghouse brands. Check your specific model number below:

Installation Overview

Replacing the lid lock takes about 20-30 minutes. You'll need to unplug the washer, remove the top panel or control console depending on your model, disconnect two wire harnesses from the old lock assembly, and snap the new one into place. The hardest part is usually getting the top panel off without breaking the plastic clips. Always unplug the washer first — this part has live voltage when the machine is plugged in.

Why This Part Fails

Lid lock assemblies wear out mechanically. Every time you close the lid, a small motor engages the lock, and those moving parts eventually fail. Hard water areas see faster failure because mineral deposits can gum up the locking mechanism. If you've been forcing the lid open before the cycle completes (we've all done it), that also accelerates wear on the locking tab.

Frequently Asked Questions

Will this work on a Kenmore 417 series washer?

Yes — several Kenmore 417 series models are actually rebadged Frigidaire washers. Check the model number compatibility list to confirm your specific model.

Can I bypass the lid lock instead of replacing it?

Technically yes, but it's a bad idea. The lid lock prevents the washer from spinning when the lid is open, which is a safety feature. Bypassing it means the washer could injure someone if the lid opens mid-spin.

How do I know if it's the lid lock or the control board?

If the washer displays a lid lock error code and you hear the lock mechanism clicking but it won't engage, it's usually the lock assembly. If there's no clicking sound at all and the washer is completely dead, check the control board first.