Whirlpool & KitchenAid Dishwasher Lower Dishrack Wheel Assembly Parts — Models & Compatibility

When your dishwasher's lower rack starts catching, scraping, or won't roll smoothly, you're dealing with a worn dishrack wheel assembly. This W10195416 lower rack roller fits over 200 Whirlpool, KitchenAid, Maytag, and Kenmore dishwasher models. One user reported their "wheel fell off and melted" — a common failure that leaves your rack stuck and dishes unevenly cleaned.

Is This the Right Part for Your Model?

Check your dishwasher's model number label — it's usually inside the door frame along the top edge or on the left side panel. Match it against the compatibility list below. This wheel assembly replaces part numbers W10195416V, AP5983730, PS11722152, and 4245021. If your lower rack doesn't glide smoothly or you hear scraping when pulling it out, this is likely your fix.

About This Replacement Part

The W10195416 lower dishrack wheel assembly is what keeps your bottom rack rolling on its rails. Over years of loading and unloading, these wheels wear down, crack, or — in extreme cases — melt from friction. You'll notice the problem when the rack sticks, tilts, or makes grinding noises during operation. The good news: this is a 15-minute fix with just a screwdriver. Users consistently report the part "fit right, works right" with no adjustments needed. At $32.99, you're preventing bigger problems like track damage or motor strain from a jammed rack.

Common Signs You Need This Part

• Rack won't roll smoothly: You have to force the lower rack in and out
• Scraping or grinding noise: Metal-on-metal sound when moving the rack
• Tilted rack: One side sits lower than the other, dishes don't clean evenly
• Visible wheel damage: Cracked, broken, or missing wheel pieces
• Door won't close properly: Misaligned rack prevents full door closure

Installation Overview

You don't need a technician for this repair. Pull the lower rack completely out of the dishwasher. The wheel assemblies attach with clips or screws on the underside of the rack corners — pop or unscrew the old ones, snap the new assemblies in place. Most people finish in under 15 minutes. The wheels should spin freely before you reinstall the rack.

Why This Part Fails

Dishwasher rack wheels take continuous punishment — repeated loading cycles, weight from dishes, and exposure to hot water and detergent chemicals. The plastic wheels eventually wear down or the axle mounting cracks. If you've been overloading the bottom rack or catching the rack on the door frame, you're accelerating wear. One melted wheel can throw off the entire rack alignment, causing those "not cleaning dishes properly" complaints.

Compatible Models

This W10195416 wheel assembly works across multiple appliance brands. Below are confirmed compatible models — always verify your exact model number before ordering.

What's Included

You're getting one lower dishrack wheel assembly — you'll typically need two per dishwasher (one for each rear corner of the lower rack). Check your existing setup: if both wheels are worn, order two assemblies to fix the problem completely. The wheel includes the roller, axle, and mounting hardware.

Tools You'll Need

• Flathead or Phillips screwdriver (depending on your rack design)
• Clean cloth (to wipe the rack rails while you're in there)

Price & Availability

The W10195416 lower dishrack wheel assembly sells for $32.99. That's significantly cheaper than the $80-150 a service call would cost, and you're fixing it today instead of waiting for a technician. Users report parts "arrived promptly" and installed without issues. Stock levels stay consistent since this is a high-turnover repair part.