Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer runs normally but produces no heat, or heat is insufficient to dry a full load.
Clothes require two or more full cycles to dry completely due to inadequate or intermittent heat.
Dryer stops running before the cycle is complete, triggered by a faulty thermostat tripping prematurely.
Excessive heat is emitted even on low heat settings because the thermostat fails to cut power at the correct temperature.
Dryer fails to begin a cycle due to an open high limit thermostat interrupting the circuit at startup.
💡 Pro Tip: How to Diagnose a Faulty High Limit Thermostat
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces no heat or not enough heat to dry clothes
⚠️ Clothes take much longer than usual to dry (2+ cycles needed)
⚠️ Dryer repeatedly shuts off mid-cycle before clothes are dry
⚠️ Dryer runs excessively hot even on low heat settings
🔍 Confirm diagnosis: Set your multimeter to continuity mode and probe both terminals of the thermostat at room temperature. A healthy thermostat reads CLOSED (continuity). If your meter shows OPEN (no continuity) at room temperature, the thermostat has failed and must be replaced. Always check for lint-blocked exhaust venting first — restricted airflow is the #1 cause of high limit thermostat failure.
📦 What's in the Box
✅ 1× Dryer High Limit Thermostat (L250-80, with terminal extension arm)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.