Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer drum spins normally but produces zero heat — clothes remain completely wet after a full cycle. A burned-out or severed heating coil is the most common cause.
Clothes require two or more drying cycles to dry fully. A partially failed element produces insufficient heat, extending drying times significantly.
Samsung dryer displays HE (Heating Error) or HC (Heating Circuit) fault code. Replacing the failed heating element resolves the heating circuit fault and clears the error.
Dryer runs extremely hot or cycles off prematurely. A failing element with a partially shorted coil can cause erratic temperature swings before complete failure.
💡 Pro Tip: How to Know If Your Heating Element Is Bad
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces no heat at all — drum spins normally but clothes remain wet
⚠️ Clothes take two or more cycles to fully dry — element partially burned through
⚠️ Dryer displays HE (Heating Error) or HC (Heating Circuit) error codes
⚠️ Visible broken or severed coil wire when element assembly is removed and inspected
🔍 Technician Tip: Set a multimeter to continuity/resistance mode and probe the two element terminals. A good element reads approximately 8–12 ohms. An open (infinite) reading confirms a failed coil. Also inspect for lint buildup coating the element — heavy lint accumulation accelerates burnout and should be cleaned before installing the new part.
📦 What's in the Box
✅ 1× DC47-00019A Dryer Heating Element Coil (5300W / 240V, 5/16" terminals) — housing not included, reuse existing housing from old part
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.