




Washer or dryer shakes violently on the pedestal during spin cycles due to worn, cracked, or missing rubber leg pads.
Rhythmic thumping or banging sound during operation caused by the appliance leg making direct hard contact with the pedestal corner without a cushioning pad.
Washer or dryer rocks or shifts on the pedestal because one or more rubber corner pads are missing or completely flattened.
Pedestal unit slides or 'walks' across the floor during heavy loads because the rubber pads no longer grip and absorb vibration energy.
Hard plastic pedestal feet scratch or mark flooring when rubber pads are missing, allowing direct rigid contact between the pedestal and the floor surface.




💡 Pro Tip: How to Tell Your Pedestal Pads Need Replacing
Your part is likely the culprit if you notice any of the following:
⚠️ Washer or dryer rocks or is unstable on the pedestal during operation
⚠️ Excessive vibration or loud thumping noise that wasn't there before
⚠️ Visible cracks, crumbling rubber, or missing pads on one or more pedestal corners
⚠️ Appliance has shifted or moved on the pedestal — especially after a move or installation
Tip: Tilt the machine slightly to one side and inspect all four bottom corners of the pedestal. Replace any pad that is cracked, compressed flat, or missing entirely. Always replace all 4 pads at the same time for balanced support — do NOT mix old and new pads, as uneven height can cause premature leg wear.
📦 What's in the Box
✅ 1× Pedestal Leg Pad / Spacer (1.5" diameter rubber, Part# 8537982) — order quantity 4 for a complete set
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.